Promotion products

Raspberry Pi mounting elements

Raspberry Pi constructions can take different forms. They result in technologically advanced systems, but also in simple devices which are sometimes the beginning of the adventure with robotics. Raspberry Pi can be supplemented with various peripheral add-ons, so that we get a design that meets our expectations and provides the right functionality. Proper installation is extremely important for efficient operation, only then will the Raspberry Pi construction be stable. Due to the mounting elements, your Raspberry will gain more possibilities and power. Moreover, they will allow you to avoid many relatively frequent failures, which results in reliable operation and a long life of the hardware. Our offer includes mounting elements for Raspberry Pi, which you can choose according to the specificity and level at which your project is being developed. You will match them to your equipment to further improve its efficiency, performance and reliability. Find accessories that will give your Raspberry even more possibilities than before.

Products: 40
Loading...

Replacement CSI/DSI Connector for Raspberry Pi 4B/3B+/3B/2B

The CSI/DSI connectors are used as camera and display slots in the Raspberry Pi 4B/3B+/3B/2B. The subject of sale is a spare part, which can be soldered into the board in...
Index: DNG-18275
Index: DNG-18275
Shipping in 24 hours
Available, 24h shipping!
(Check quantity)
Regular price €0.44 Price €0.44

Set of heatsinks for Raspberry Pi with thermoconductive tape + engraving - 2 pcs

Set includes one blue heatsink in size: 9 x 9 x 12 mm and a copper one engraved with the logo of the Raspberry Pi in size 12 x 12 mm. You can use them to cool the chips of a...
Index: DNG-12708
Index: DNG-12708
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.33 Price €1.33

STS-Pi - Roving Robot 2WD - 2-wheel robot chassis for Raspberry Pi

The chassis of the robot STS-Pi was designed for use with Raspberry Pi together with the panel Explore HAT Pro or Explore pHAT, but will also cooperate with other motor...
Index: PIM-11466
Index: PIM-11466
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €32.44 Price €32.44

Metal Spacers Delock M2,5 20mm + screws and nuts for Raspberry Pi - 4 pieces

Metal spacers with a length of 20 mm, designed for installation of extension boards for Raspberry Pi. Elements of this type are based on the screw, allow to keep the same...
Index: RPI-08118
Index: RPI-08118
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.09 Price €5.09

Metal Spacers Delock M2,5 10mm + screws for Raspberry Pi - 4 pieces

Metal spacers with a length of 10 mm, designed for installation of extension boards for Raspberry Pi. Elements of this type are based on the screw, allow to keep the same...
Index: RPI-08115
Index: RPI-08115
Waiting for delivery
Czas oczekiwania ok. 5-10 dni
Regular price €4.16 Price €4.16

Female goldpin strip 2x20 raster 2,54mm for Raspberry Pi - without soldering

40-pin goldpin connector strip which doesn't require soldering thanks to the clamps. It is used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm.
Index: PIM-10622
Index: PIM-10622
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.00 Price €3.00

Goldpin 2x20 straight raster 2.54mm

Male goldpin strip with 2 x 20 pins. Raster is 2.54 mm in length and 2.54 mm in width - between the two strips. It works with Raspberry Pi Zero among others.
Index: DNG-12659
Index: DNG-12659
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €0.22 Price €0.22

Connector Set - goldpin 2x20 male, female and mounting device - without soldering

Set of 40-pin goldpin connector strips which don't require soldering thanks to the clamps. They are used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm. The set...
Index: PIM-10624
Index: PIM-10624
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.12 Price €8.12

Female socket 2x20 raster 2.54mm for Raspberry Pi 4B/3B+/3B/Zero long pins 3mm - Adafruit 1992

40 -pin female connector strip compatible with the GPIO connector of the Raspberry Pi model 4B/3B+/3B/Zero with elongated pins with a length of 3 mm. Raster of the outputs is...
Index: ADA-07045
Index: ADA-07045
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.31 Price €3.31

Metal Spacers Delock M2,5 30mm + screws for Raspberry Pi - 4 pieces

Metal spacers with a length of 30 mm, designed for installation of extension boards for  Raspberry Pi . Elements of this type are based on the screw, allow to keep the same...
Index: RPI-08117
Index: RPI-08117
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.33 Price €5.33

Set of heat sinks for Raspberry Pi with thermoconductive tape + engraving - 3pcs.

Set consisting of three heat sinks in blue, copper and gold with engraved Raspberry Pi logo. They can be used to cool Raspberry Pi 4B / 3B+ / 3B / 2B minicomputer circuits.
Index: GRL-15287
Index: GRL-15287
Waiting for delivery
Waiting time about 10-30 days
Regular price €2.95 Price €2.95

Male goldpin strip 2x20 raster 2,54mm for Raspberry Pi - without soldering

40-pin goldpin connector strip which doesn't require soldering thanks to the clamps. It is used in Raspberry Pi 4B/3B+/3B/Zero. Raster of 2.54 mm.
Index: PIM-10623
Index: PIM-10623
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.03 Price €2.03

How to install components using Raspberry Pi mounting elements?

You may be an experienced constructor or an aspiring amateur, you may be motivated and have knowledge at different levels, but without the right assembly elements you will not be able to create a stable construction based on Raspberry Pi. Particularly important is the Raspberry Pi 4B, a fourth-generation microcomputer, which enables any integration with a large number of peripheral devices, as well as many options to boost the computing power of the device. This is particularly important if you are planning a highly original and individual project that will create something truly unique and unprecedented. It can be one of the systems of modern monitoring, an intelligent installation in the building, or a weather station, allowing you to control the conditions outside. You don't have to use a soldering iron, which may be a good friend of yours, but working without it can be easier, faster and more effective. Replace it with Goldpin connectors, which will allow you to connect all the components together thoroughly.

Of course, you should always have your soldering iron at hand, but don't give up on extras that are designed for easy and quick installation. You should realize that the enhanced computing power, as well as the intensive work of the device, makes a lot more energy is precipitated and heat is generated in this way. This is particularly dangerous for the processor, which can easily be damaged. The problem is compounded by faulty ventilation and cooling system. For this reason, it is essential to keep a sufficient distance between the boards and the individual installations during installation. For effective heat dissipation, use an additional heatsink with tape support. A special cooling paste will also be useful.

Raspberry Pi mounting elements to back up your equipment

Not only the use of mounting elements and the correct combination of individual components guarantees smooth and safe operation of the hardware. These elements must be of good quality, made of high quality materials, as well as adapted to work in the specific conditions of a microcomputer. We offer assembly elements that have been tested by us and have been previously tested in strict conditions. You can choose from a variety of heat sinks and thermally conductive tapes. With them you can provide individual components as well as the whole device with the right conditions for intensive work. The construction will be stable and thus will work well even with the most advanced projects. With Goldpin connector sets you will be able to perfectly connect individual components without the need for a soldering iron. All this makes creating and constructing even more fun and brings unbelievable satisfaction.