Product description: Luxonis Oak-D-Pro PoE - AI set for image recognition - Auto-Focus
Oak-D-Pro PoE is a camera manufactured by Luxonis that offers 4 TOPS processing power and gives you the ability to run any AI model. It has also been equipped with an IR LED (for night-vision) and an IR laser point projector (off by default). The device has three cameras - two stereo cameras 1280 x 800 px and one 12 Mpx Auto-Focus camera that allows you to capture color images at a resolution of 4032 x 3040 px. It uses Power-over-Ethernet (PoE) technology for communication and power. It has M12 PoE connector (instead of regular RJ45), M8 connector for IO connections, USB2 (D+, D-), IO cameras (FSIN, STROBE) and 2 other auxiliary IOs supporting UART, I2C or GPIO. The PoE version is fully compliant with 802.3af and PoE Class 3 standards at 1000BASE-T (1Gbps) speeds and has a microSD (uSD) card slot. A PoE switch (not included) is required to power the device via the Ethernet connector.
Luxonis Oak-D-Pro PoE - AI set for image recognition - Auto-Focus.
Luxonis Oak-D-Pro PoE uses Myriad X VPU vision processor.
Myriad X VPU
- 4 TOPS of processing power (1.4 TOPS for AI)
- Ability to run any AI model, also with non-standard architecture and construction (models must be converted )
- Encoding H.264, H.265, MJPEG - 4K / 30fps, 1080p / 60fps
- Computer vision : warp/warp, resizing, cropping with ImageManip, edge detection, feature tracking, and activation of custom CV features
- Stereo depth perception with filtering, post-processing, RGB depth equalization and great configurability
- 2D and 3D object tracking
Special features Luxonis Oak-D-Pro PoE
- Equipped with an M12 X-Coded Ethernet PoE connector (instead of the usual RJ45) for power and communication, it is 802.3af PoE compliant , Ethernet 1 Gb/s
- M8 connector for I/O connections including USB2 host
- IP65 tight housing
- IR LED illumination enables observation of low-light and no-light environments
- Infrared laser spot projector (active stereo) improves depth perception, especially on surfaces with low visual interest (little or no surface texture)
Luxonis Oak-D-Pro PoE has a spot projector and LED backlight .
Kit contents.
Luxonis Oak-D PoE technical specification
- RGB camera:
- sensor: IMX378
- type: Auto Focus
- resolution: 12 Mpx (4032 x 3040 px)
- maximum frame rate: 60 fps
- focus: from 8 cm to infinity
- viewing angle (D/H/V): 78° / 66° / 54°
- lens size: 1/2.3''
- pixel size: 1.55 x 1.55 µm
- stereo camera
- sensor: OV9282
- resolution: 1 Mpx (1280 x 800 px)
- maximum frame rate: 120 fps
- focus: 19.6 cm to infinity
- viewing angle (D/H/V): 89.5° / 80° / 55°
- lens size: 1/4''
- pixel size: 3 x 3 µm
- Dimensions: 111 x 40 x 31.3mm
- Weight: 184g
Comparison of Auto-Focus and Fixed Focus versions
The Oak-D Pro module is available in two versions, Fixed-Focus and Auto-Focus, which differ only in the configuration of the central camera. The Fixed-Focus variant has a mechanically fixed (fixed-focus) lens, and the Auto-Focus model focuses automatically through a built-in electromagnet that dynamically controls the position of the lens .
- Auto-Focus cameras are recommended for observing objects in close proximity - in the range of 10 cm to 50 cm from the device. They can also be manually set to a specific focus position using the DepthAI API.
- Fixed-Focus cameras are used in environments with strong vibrations, they are used in devices such as drones.
Check also other Luxonis cameras available in our offer.
