Promotion products

Arduino sensors

The Arduino platform has been considered for years as probably the best solution in the field of programmable electronics. The main advantages are: ease of programming, a wide range of fully compatible overlays (Arduino Shields) and the availability of different versions of main boards (the official ones and hardware compatible substitutes). All these means that Arduino platforms, together with the Arduino IDE programming environment, have become an integral part of robotics. Both amateurs and professionals reach for tiles. The tiles have entertainment and research applications, and are also used to develop businesses (including projects related to the Internet of Things and production lines). In this category we have placed various sensors for Arduino, which offer is so wide that we had to divide the list into several more subcategories. From a technical point of view, sensors are devices that provide information about the appearance of a particular stimulus or exceeding a given value. We invite you to familiarize yourself with various sensors, including sensor sets for Arduino, the Grove series, the Gravity series and other products.

Products: 162
Loading...

Grove - a set of 5 female-female 4-pin - 2mm / 20cm I2C splitters

A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...
Index: SEE-04396
Index: SEE-04396
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €5.09 Price €5.09

DFRobot KIT0011 - set of 27 modules with cables for Arduino

A set of 27 popular modules compatible with Arduino boards. In the set are i.a.: distance, light, touch, rotation, vibration, gas sensor, and a module with LED, relay and more....
Index: DFR-04297
Index: DFR-04297
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €50.00 Price €50.00

Grove - a set of 5 female-female 4-pin - 2mm / 5cm cables with a latch

A set of five 4-pin wires Grove. They are used to connect Grove sensors with Base Shield Board v2. Wire length is 5 cm. Version with lock.
Index: SEE-04397
Index: SEE-04397
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €1.74 Price €1.74

DFRobot Gravity DFR0018 - set of 9 modules with cables for Arduino

A set of 9 popular modules compatible with Arduino boards. It has 7 sensors, including: light, temperature, touch, rotation, vibration sensors, and the button and the module...
Index: DFR-03933
Index: DFR-03933
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €24.42 Price €24.42

Grove - set of 5 female-female 4-pin - 2mm / 30cm with latch

A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. Cable length is 30 cm. Version with a latch.
Index: SEE-04398
Index: SEE-04398
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €2.91 Price €2.91

Grove - a set of 5 female-female 4-pin - 2mm / 20cm cables with a latch

A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. Wire length is 20 cm. Version with a latch.
Index: SEE-04400
Index: SEE-04400
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €2.53 Price €2.53

Grove - a set of 5 wires 4-pin 2mm - male cables 2.54mm / 20cm

A set of five wires 4-pin Grove male wires 2.54 mm. They are used to connect Grove sensors with boards incompatible with the Grove raster 2.54 mm wires, for example Arduino.
Index: SEE-04402
Index: SEE-04402
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €2.65 Price €2.65

Grove - a set of 5 wires 4-pin 2mm - female wires 2.54mm / 30cm

A set of five 4-pin Grove female wires. They are used to connect Grove sensors with a board incompatible with the Grove raster 2.54 mm wires, such as Raspberry Pi. Length is...
Index: SEE-04401
Index: SEE-04401
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €3.37 Price €3.37

Grove - GPS UART module with antenna

GPS module based on the system  SIM28 . It supports 66 channels, works with a voltage of 3.3 V and 5V, communicates through the UART interface (TX, RX). The kit includes a...
Index: SEE-04406
Index: SEE-04406
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €23.24 Price €23.24

Grove - heart rate sensor with a clip on the ear

Set for monitoring the heart rate, contains an ear clip with a wire and receiver module. The results can be displayed on the monitor through a serial port. The supply voltage...
Index: SEE-04409
Index: SEE-04409
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.00 Price €13.00

Grove - TH02 - I2C temperature and humidity sensor

Temperature and humidity sensor TH02 from Grove with I2C interface. The temperature measurement range is from 0 °C to 70 °C and humidity from 0 to 80% RH .
Index: SEE-04413
Index: SEE-04413
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.51 Price €11.51

Grove - 125kHz RFID reader with antenna

Easy to use module of RFID reader with UART and Wiegand interface. Works with UEM4100 RFID modules. The kit includes antenna which allows you to communicate in a range up to 7...
Index: SEE-04417
Index: SEE-04417
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €12.79 Price €12.79

Sensor sets for Arduino

The purchase of additional sensors for Arduino is a recommended solution that will expand the range of possibilities. By buying these sensors, you will be able to create even more different projects. The beginners, however, very often may have a problem with choosing the right sensors. A good way is to buy a ready-to-use set of sensors for Arduino!

All products offered by Botland in this category are fully compatible with other Arduino components. The products have compatible voltage levels (up to 5 V DC or 3.3 V for some versions of the controller) and an appropriate value of current drawn (not exceeding a few or a dozen milliamperes).

From a technical point of view, when choosing sensors for Arduino, it is also worth paying attention to the number of wires. In a situation where a given element requires a small number of wires, most often just a few male-female or female-female cables are needed to be able to enjoy a working system. If you are just starting the adventure and would like to learn as much as possible in the field of programming and electronics, be sure to reach for the Arduino sensor sets available in our offer. Each set contains a set of sensors and many other basic elements. One purchase guarantees you successful fun while designing your own devices (even robots!).

DFRobot Gravity and Grove series – familiarize yourself with the best sensor sets for Arduino!

The designers from DFRobot know well how complicated and not easy electronics is, especially when related programming microcontrollers. To make the easiest beginnings of getting to know electronics, as well as further development in this field, special sensor sets for Arduino were created (many of them are also compatible with Raspberry devices!).

The DFRobot Gravity series is the best quality products. Each module is connected to Arduino using a three-core cable that provides power to the board (black and red wires). It enables signal transmission to the microcontroller. What's more, the colors of the wires and gold pin on the dedicated overlay allow easy identification of the function of the module. This makes installation and operation of modules very easy. The DFRobot manufacturer allows you to familiarize yourself with many ready-made examples of projects that you can create.

The same can be said about the Grove series, which is also available in the Botland online store. These are sets of sensors for Arduino, which are perfect both at the beginning of the adventure and during its duration. Equip yourself with the necessary sensors and carry out projects according to your own imagination!

Other sensors for Arduino

We are specialists in the field of Arduino sensors – please be sure to see how powerful the offer of these extremely important elements and modules we have gathered in this category!

It does not matter if you want to make a bathroom flood detector, soil moisture meter, remote thermometer, intelligent vacuum cleaner or robot wheel speed meter. You can complete all of the above-mentioned projects (as well as millions of others) using the components presented in our store. Choose a set of sensors right now or choose some individual products from the list. In Botland Store you will be able to choose the sensors that will suit the project you are working on perfectly!