Filter by
Price
0 28
more (-5) ok clear
Manufacturers
more (531) ok clear
Filter

Promotion products

Recomendations

Arduino - prototyping accessories

Products: 32
Loading...

Self-adhesive square feet 12x12mm - 4 pcs.

Self-adhesive feet - props  for electronic modules, square size 12 x 12 x 6 mm . Price for 4 PCs.
5.0 (18)
Index: ETN-01334
Index: ETN-01334
Shipping in 24 hours
Available
Regular price €0.90 Price €0.90

Set of 5mm LEDs 10pcs with resistors

Set of ten 5 mm LEDS with resistors. The kit includes: 10 PCs resistors 1.2  kΩ and 3 PCs green, red and yellow LEDs and 1 blue LED.
5.0 (6)
Index: LED-04663
Index: LED-04663
Shipping in 24 hours
Available
Regular price €1.50 Price €1.50

Connecting cables female-male 20cm red - 10pcs

Set of 10 high quality connecting cables with a length of 20 cm in red.
5.0 (9)
Index: KAB-01400
Index: KAB-01400
Shipping in 24 hours
Available
Regular price €1.50 Price €1.50

Set of electronic components + breadboard 830 - E23 - 830 elements

The set of prototype elements that can be used for  creating electronic circuits with Arduino. The kit includes: breadboard, power supply for the breadboard, sets of wires,...
4.9 (34)
Index: GRL-12112
Index: GRL-12112
Shipping in 24 hours
Available
Regular price €16.50 Price €16.50

Self-adhesive round feet low 8mm - 4 pcs.

Self-adhesive feet - round props  for electronic modules, with an 8 mm diameter. Price for 4 PCs.
4.8 (6)
Index: ETN-01335
Index: ETN-01335
Shipping in 24 hours
Available
Regular price €0.50 Price €0.50

Connecting cables female-male 30cm colored - 50pcs

Set of 50 high-quality connecting cables with a length of 30 cm in different colours.
5.0 (13)
Index: KAB-01438
Index: KAB-01438
Shipping in 24 hours
Available
Regular price €6.90 Price €6.90

Set of electronic components - E32 - 254 elements

A set of 254 prototype elements for Arduino and Raspberry Pi. Includes: button Tact Switch, LEDs, resistors, potentiometers and goldpin strips. All closed in a small...
5.0 (13)
Index: GRL-12110
Index: GRL-12110
Shipping in 24 hours
Available
Regular price €4.90 Price €4.90

Electronic components set E24 + breadboard 400 - E24 - 235 elements

The set of prototype elements that can be used for creating the systems with Arduino. The kit includes: a breadboard, the power module for the breadboard, sets of wires, Tact...
4.9 (29)
Index: GRL-12111
Index: GRL-12111
Shipping in 24 hours
Available
Regular price €9.50 Price €9.50

Breadboard - 830 holes transparent

Breadboard is used to create and test electronic circuits without soldering. Version with 830 fields, sized 165 x 53 mm in a transparent case . B lue and red stripes, marking...
5.0 (9)
Index: PLY-01763
Index: PLY-01763
Shipping in 24 hours
Available
Regular price €3.50 Price €3.50

Set of female connectors for Arduino Uno and Leonardo

Straps used in the Arduino Uno and Leonardo. The kit includes four straps: 2 x 8-pin, 1 x 10-pin and 1 x 6-pin.
5.0 (2)
Index: KAB-01988
Index: KAB-01988
Shipping in 24 hours
Available
Regular price €0.90 Price €0.90

Long jumper - 10pcs

Extended jumper for goldpin connectors - raster of 2.54 mm Price for 10 pieces.
5.0 (7)
Index: KAB-02076
Index: KAB-02076
Shipping in 24 hours
Available
Regular price €0.50 Price €0.50

Connecting cables male-male 30cm colored - 50pcs

Set of 50 high-quality connecting cables with a length of 30 cm in different colours.
4.9 (13)
Index: KAB-01437
Index: KAB-01437
Shipping in 24 hours
Available
Regular price €6.50 Price €6.50

Female socket 1x6 raster 2,54mm for Arduino - 5 pcs.

6-pin female strap used in the Arduino Uno and Leonardo. Raster: 2.54 mm. Price for 5 pieces.
5.0 (4)
Index: UCC-01989
Index: UCC-01989
Shipping in 24 hours
Available
Regular price €0.90 Price €0.90

Female socket 1x10 raster 2,54mm for Arduino - 5pcs

10-pin female connector strip is used in the Arduino Uno and Leonardo. Raster: 2.54 mm. Price for 5 pcs of connectors.  
5.0 (3)
Index: UCC-01991
Index: UCC-01991
Shipping in 24 hours
Available
Regular price €0.90 Price €0.90

Set of female connectors extended for Arduino Uno and Leonardo

Strap designed for Arduino Uno and Leonardo. Mounted in a cascade extend the connectors placed on modules. The kit includes four straps: 2 x 8-pin, 1 x 10-pin and 1 x 6-pin.
5.0 (5)
Index: SPF-01748
Index: SPF-01748
Shipping in 24 hours
Available
Regular price €1.50 Price €1.50

Round self-adhesive feet 20mm - 4 pieces

Self-adhesive feet - round props  for electronic modules, about 20mm in diameter. Price for 4 PCs.
5.0 (9)
Index: AKS-11521
Index: AKS-11521
Shipping in 24 hours
Available
Regular price €0.50 Price €0.50

Female socket extended 1x6 raster 2,54mm for Arduino

6-pin female connector strip, allows you to extend the Arduino connectors. Raster: 2.54 mm.
5.0 (2)
Index: SPF-01849
Index: SPF-01849
Shipping in 24 hours
Available
Regular price €0.50 Price €0.50

Breadboard - 400 holes transparent

Breadboard is used for creating and testing electronic circuits without soldering. Version with 400 cells, the size of 82.5 x 53 mm, with a transparent body. Stripes denoting...
5.0 (8)
Index: PLY-01143
Index: PLY-01143
Shipping in 24 hours
Available
Regular price €3.50 Price €3.50

Set of electronic components - diodes, resistors, buttons

A set of electronic elements required while designing on breadboards. Set includes e.g. resistors, potentiometers and LEDs.
5.0 (14)
Index: PAS-09910
Index: PAS-09910
Shipping in 24 hours
Available
Regular price €4.90 Price €4.90

Female socket extended 1x10 raster 2,54mm for Arduino - 5pcs

10-pin female connector strip, allows you to extend the Arduino connectors. Raster:  2.54 mm. Pirce for 5 pcs of connectors.
5.0 (2)
Index: SPF-01750
Index: SPF-01750
Shipping in 24 hours
Available
Regular price €1.50 Price €1.50

Nano Screw Terminal Adapter - screw connectors - hat for Arduino Nano - Arduino ASX00037

Nano Screw Terminal Adapter is an overlay designed for the Arduino Nano series board, which allows for comprehensive prototyping without the need to solder the leads. The...
5.0 (5)
Index: ARD-22374
Index: ARD-22374
Shipping in 24 hours
Available
Regular price €13.50 Price €13.50

Gravity - IR Positioning Camera for Arduino - DFRobot SEN0158

Infrared positioning camera designed for use with Arduino . Allows tracking up to four heat sources . It can be used in a wide range of projects - from tracking robots...
5.0 (1)
Index: DFR-19901
Index: DFR-19901
Shipping in 24 hours
Available
Regular price €27.50 Price €27.50

Self-adhesive round feet 11mm - 4pcs

Self-adhesive round feet - props  for electronic modules, with an 11 mm diameter. Price for 4 PCs.
5.0 (6)
Index: ETN-01337
Index: ETN-01337
Shipping in 24 hours
Available
Regular price €0.50 Price €0.50

MCP23017 module - GPIO pin expander - 16-channel I2C - STEMMA QT / Qwiic - Adafruit 5346

Lead expander from Adafruit equipped with the MCP23017 chip. It allows you to extend the number of pins of modules such as Arduino or Raspberry Pi by an additional 16 I/O...
5.0 (9)
Index: ADA-21037
Index: ADA-21037
Shipping in 24 hours
Available
Regular price €8.50 Price €8.50

Contact plates and prototype cables

The necessary equipment for every Arduino fan, but also for every other electronics, are of course contact plates. They are designed to create electronic circuits, even the most complex ones, as well as to make changes and necessary corrections. The contact plates are very versatile. They can be disassembled at any time, and a new, completely different circuit can be created on the board. There is no need to solder, so that the elements retain their original state and are not damaged. The ends of the circuit are plugged into the appropriate fields on the board, which is an easier and much less invasive way. This way, one board and different kinds of elements can be used repeatedly, but in completely different projects. So you have the chance to experiment without having to replace the board or worn out elements. This is a great way to start your training and adventure with electronics. Contact plates will be appreciated by people facing only the first or one of the first projects. They are also used in prototyping systems for professional use. At the development stage they can be changed without the risk of damaging any element.

Other important accessories for Arduino are prototype cables. They are versatile and multipurpose. They are compatible not only with Arduino, but also with other sets and modules that have a goldpin connector. The cables can be male-male, female-female and mixed, that is, male-female. All of them are available in our offer. Choose one that best suits the type of connector used. Prototype cables come in the form of single cables with connectors that have been pre-clamped and coloured tape cables with contacts as well. You can easily divide the two types.

Prototype accessory kits for beginners

Everyone starts somewhere and everyone has to follow the same path to turn from an amateur to a professional. To make this path easier, however, pick one of our prototype accessories sets for Arduino, which are dedicated to beginners. Among them you will find E32 set with 254 parts, as well as sets additionally equipped with a contact plate with a compatible power supply module and connection cables. Another interesting feature is the set, which includes a board with a base with sockets for easy power connection. You should also opt for a set with a set of four anti-slip feet.

Let your Arduino work even more efficiently and give you more possibilities to complete your more or less sophisticated projects. Choose the necessary prototype board accessories or starter kit and start designing with no limits. The store offers a wide range of contact plates, prototype cables and ready-made, complete sets.