Product description: Set of electronic components + contact board 400 - E24 - 235 elements
A set of prototyping components that can be used to create electronic circuits with Arduino or other microcontrollers . The set includes a breadboard , breadboard power supply , wire harnesses , tact switches , LEDs , transistors , capacitors , resistors , a resistor identification table , and much more. Everything is housed in a small container .
Set of electronic components.
The set includes:
| No. | Photo | Description |
|---|---|---|
| 1 |  | Contact plate 400 holes - 1 pc. It is used to quickly create prototype systems. |
| 2 |  | Power supply module for breadboard - 1 pc. Power supply module for the breadboard, allows you to connect a 5 V or 3.3 V power supply using a mains adapter. |
| 3 |  | Passive buzzer - 1 pc. Buzzer without continuous tone generator. Allows you to add audible signaling to your project. |
| 4 |  | Active buzzer - 1 pc. A buzzer with a continuous tone generator allows you to add an audible signal to your project. In an active buzzer, simply apply a low signal to its pin to trigger the sound. |
| 5 |  | Precision potentiometer - 1 pc. Can be used as a knob in the user interface. |
| 6 |  | Shift register chip 74HC595N - 1 pc. |
| 7 |  | Optocoupler 4N35 - 1 pc. ( documentation ) |
| 8 |  | Electrolytic capacitor 100uF / 50V - 5 pcs. A passive electrical component characterized by the ability to store electric charge, used in power supply filtering and to create voltage regulators. It has a capacitance of 100 uF / 50 V. |
| 9 |  | Electrolytic capacitor 10uF / 50V - 5 pcs. A passive electrical component characterized by the ability to store electric charge, used in power supply filtering and to create voltage regulators. It has a capacitance of 10uF / 50V. |
| 10 |  | NPN transistor PN2222 - 5 pcs. Transistors are capable of amplifying electrical signals. Their maximum voltage is 40 V and their maximum current is 1 A. ( documentation ) |
| 11 |  | Rectifier diode 1N4007 - 5 pcs. Used to rectify current. ( documentation ) |
| 12 |  | Photoresistor - 2 pcs. A sensor that changes resistance under the influence of incident light intensity. |
| 13 |  | Tact Switch Button - 10 pcs. A small monostable pushbutton mounted using a THT through-hole method. Its dimensions are 5 x 5 mm, and it is 8 mm high. |
| 14 |  | Thermistor - 1 pc. Temperature sensors. As temperature increases, resistance decreases. |
| 15 |  | RGB LED - 1 pc. An LED emitting colors from the RGB color palette. |
| 16 |  | Goldpin strip 1x40 - 2 pcs. |
| 17 |  | Male-male jumper cables - 65 pcs. |
| 18 |  | Female-male connecting cables - 10 pcs. |
| 19 |  | Ceramic capacitor 104 - 10 pcs. A passive electrical component characterized by the ability to store electric charge, used in power supply filtering and to create voltage regulators. It has a capacitance of 100 nF. |
| 20 |  | Ceramic capacitor 22 pf - 10 pcs. A passive electrical component characterized by the ability to store electric charge, used in power supply filtering and to create voltage regulators. It has a capacitance of 22 pF. |
| 21 |  | LED diode - red - 10 pcs. An LED diode emitting red light. |
| 22 |  | LED diode - green - 10 pcs. LED diode emitting green light. |
| 23 |  | LED diode - yellow - 10 pcs. LED emitting yellow light. |
| 24 |  | LED diode - blue - 10 pcs. LED diode emitting blue light. |
| 25 |  | LED diode - white - 10 pcs. LED diode emitting white light. |
| 26 |  | 10 Ω resistor - 10 pcs. A passive electrical component used to limit the current of an electrical circuit. |
| 27 | | 100 Ω resistor - 10 pcs. A passive electrical component used to limit the current of an electrical circuit. |
| 28 | | Resistor 220 Ω - 10 pcs. A passive electrical component used to limit the current of an electrical circuit. |
| 29 | | 330 Ohm resistor - 10 pcs. A passive electrical component used to limit the current of an electrical circuit. |
| 30 | | Resistor 1 kΩ - 10 pcs. A passive electrical component used to limit the current of an electrical circuit. |
| 31 | | Resistor 2 kΩ - 10 pcs. A passive electrical component used to limit the current of an electrical circuit. |
| 32 | | Resistor 5.1 kΩ - 10 pcs. |
| 33 | | 10 kΩ resistor - 10 pcs. A passive electrical component used to limit the current of an electrical circuit. |
| 34 | | Resistor 100 kΩ - 10 pcs. A passive electrical component used to limit the current of an electrical circuit. |
| 35 | | Resistor 1 M Ω - 10 pcs. A passive electrical component used to limit the current of an electrical circuit. |
| 36 |  | Resistor color code card - 1 pc. A card that helps distinguish the resistance of resistors based on the colored stripes on their housing. |
| 37 |  | Plastic container. |
Set of electronic components + contact board 400 – E24 – 235 elements
The Arduino Electronics Starter Kit is a complete set that's perfect for introducing you to the Arduino environment. Using it, you can expand your knowledge of the environment and create numerous electronic circuits.
The Arduino electronics kit includes 235 essential parts, carefully assembled. They are based on a 400-pin breadboard, used for prototyping circuits, and include numerous other components. All of this is packaged in a practical container.
Detailed information about the contents of the set
The Arduino starter kit is a practical set based on a breadboard, to which elements such as a power supply module (allows the board to be powered by 3.3 V or 5 V), a passive and active buzzer, and Tact Switch buttons have been fitted.
The kit also includes many smaller components essential for creating circuits, including various types of resistors, LEDs in numerous colors, ceramic and electronic capacitors, and numerous wires. A handy table is also included to facilitate part identification.
