No matter if you're a hobbyist or professional in electronics or robotics, you should equip yourself with the right set of tools and accessories that not only make your work easier, but often enable you to perform certain activities. Surely your workshop shouldn't run out of drills and soldering irons, but let there be cable crimping machines and insulation strippers alongside. These are seemingly small, meaningful accessories, but in fact they prove indispensable for some projects. They are useful even during housework and repairs, so not only for the DIY enthusiast and professional electrician, but also for anyone who is ready to do small repairs at home. Squeezers and crimping tools are small tools that can fit in any drawer and tool case. They make repair and assembly work quicker, more accurate and more efficient. Check which models we can offer you and choose the one that best suits your work.
Gravity - alcohol sensor 0-5ppm - I2C / UART - DFRobot SEN0376
Index: DFR-19016
- Reduced price
- Promotion
Official mouse for Raspberry Pi Model 4B/3B+/3B/2B - black-gray
Index: RPI-15304
- Reduced price
- Promotion
- Reduced price
- Promotion
Pullers and ticks
Loading...
Insulation stripper Yato YT-2268 0,2-4mm2
Wire stripping tool for wires with cross section from 0,2 to 4 mm2.
Index: NSZ-04833
Index: NSZ-04833
Automatic insulation stripper ST-02
High-quality automatic insulation puller with cutter.
Index: NSZ-00653
Index: NSZ-00653
Automatic insulating puller with cutter Vorel 45201
Automatic insulation puller, supports wires with a wire diameter of 0.5 - 4.0 mm (20 - 13 AWG) and 0.08 - 2.0 mm2 (14 - 28 AWG).
Index: NSZ-01827
Index: NSZ-01827
Stripper for insulation Vorel 45010
Puller for insulating electrical wires, 185 mm long. Supports wires: 0.64 - 2.6 mm (10 - 22 AWG). Hardness: HRC 50 - 53.
Index: NSZ-02023
Index: NSZ-02023
Universal clamp for accurate point clamping. The length of the clamp is 100 mm . Maximum jaw opening is 23 mm , depth is 38 mm .
Index: NSZ-12323
Index: NSZ-12323
Crimping tool for connectors HT-202B
End-cutter crimping machine with hardened tool steel cutter. Length of pliers: 180 mm. Handle in red or blue.
Index: NSZ-01127
Index: NSZ-01127
Phone opening tool - separator - 3 mm
Universal opening tool with the thickness of 3 mm for phone cases, tablets, notebooks, navigation and other electronic equipment. It is used to repair touch screens. Made of...
Index: DLT-12310
Index: DLT-12310
Universal compression for accurate, point-like clamping. Clamping length is 100 mm. Maximum jaw opening is 42 mm, depth 44 mm.
Index: NSZ-04531
Index: NSZ-04531
Crimping tool for RJ45, RJ12, RJ11, RJ9 + stripper
Crimping tool for 8P8C/RJ45, 6P6C/RJ12, 6P4C/RJ11 connectors. Made of hardened steel. The set includes stripper for UTP/STP cables.
Index: NSZ-04609
Index: NSZ-04609
Crimping tool + connectors set - different kinds - 100pcs.
A crimping tool and a set of 100 connectors for wires. It is designed for cables with a thickness of 1.25 mm to 4 mm.
Index: IMP-12906
Index: IMP-12906
Crimping tool for HT-202A connectors
Crimping machine for non-insulated cable terminals with copper wire cutter . Length of pliers: 185 mm.
Index: NSZ-01524
Index: NSZ-01524
The set of tools needed to build a LAN network consisting of the patch knife, insulation strippers, crimper and tester of the cables. All is packed in an elegant case.
Index: NSZ-07479
Index: NSZ-07479
Insulation strippers with HTS501A cutter
Puller for insulation of sizeable cables: RG58 / RG58 / RG6. The arms are 120 mm long.
Index: NSZ-03048
Index: NSZ-03048
Puller for insulating electrical cables. Supports wires with diameters from 0.5 to 2 mm.
Index: NSZ-04006
Index: NSZ-04006
Hot-air torch powered by 230 V mains voltage with two-stage regulation of blowing power : 750 W / 450 l/min / 350 °C and 1500 W / 450 l/min / 500 °C.
Index: NSZ-03621
Index: NSZ-03621
Cables stripper STP/UTP - Lanberg NT-0103
A tool designed to remove insulation from STP/UTP cables. High quality of workmanship enables safe stripping without the risk of damaging the conductor. Simple construction...
Index: IMP-16861
Index: IMP-16861
Cables stripper DPM CCS001 RG-59/58/62/6
The tool for removing insulation from coaxial cables type RG-59, RG-58, RG-62, RG-6.
Index: DPM-13825
Index: DPM-13825
Hot-air torch powered by 230 V mains voltage with two-stage regulation of blowing power: 800 W / 200 l/min /1500 W / 450 l/min. The temperature can be set between 50 °C and 200...
Index: NSZ-02890
Index: NSZ-02890
165 mm long stripping pliers with screw adjustment. Suitable for conductors up to 5 mm in diameter.
Index: NSZ-08942
Index: NSZ-08942
230 V mains supply hot air tool with two-stage blowing power regulation: from 150 W to 450 W / 350 °C and from 450 W to 1500 W / 500 °C, air flow 450 l/min, temperature...
Index: NSZ-09396
Index: NSZ-09396
Crimping tool for RJ-45, RJ-12, RJ-11 plugs - Lanberg NT-0202
Crimping machine for RJ-45, RJ-12 and RJ-11 plugs commonly used in devices and elements of computer and telecommunication networks . The crimping machine is additionally...
Index: IMP-16867
Index: IMP-16867
Crimping tool for plugs RJ45, RJ12, RJ11 - Lanberg NT-0204
The crimper by Lanberg has two arms for crimping RJ45, RJ12, RJ11 plugs . It can be used as a tool for any electrician or installer who will be in contact with...
Index: IMP-16356
Index: IMP-16356
Impact tool LSA Lanberg NT-0001
Krone IDC 110 bumper tool for earning cables in LSA technology. The knife is used mainly in works related to the creation and maintenance of telecommunications...
Index: IMP-17056
Index: IMP-17056
Crimping tool RJ45, RJ12, RJ11 plugs + cable tester - Lanberg NT-0203
The NT-0203 Crimping Tool from Lanberg is a professional tool for everyone working with telecommunication and ICT cables terminated with RJ45, RJ11, RJ12, RJ14 plugs, it also...
Index: IMP-16998
Index: IMP-16998
Reliable insulation strippers
Removing insulation without a suitable tool is a tedious and laborious activity, often we are not able to get rid of it completely, which leaves permanent traces on the surfaces. Insulation strippers are tools to facilitate this activity. They are available in different variants, each with different properties and purpose. Among them there is a front stripper, which is otherwise known as an electrotechnical stripper. As the name suggests, the stripper is positioned at the front and additionally equipped with a screw with which we set the clearance. However, care must be taken when using the turnbuckle, as the turnbuckle can be squeezed too much. As an alternative, the side insulation stripper is a side insulation stripper which is a bit like a pair of scissors, with graduated holes on the blades, in which the cables with the insulation are placed for removal. This stripper is primarily comfortable to use and is therefore very popular. There is also an automatic insulation stripper. We place the cable in the jaw, hold it down and run it. It removes the insulation automatically, so it does not require a lot of effort and strength from the user. However, it is important to know that it does not work well for short cables, but it is used for tapes and flat cables.
In our store you will find various types of insulation strippers, as well as special models designed for processing of antenna cables, coaxial cables, ICT cables and optical fibers. There are manual and automatic strippers, so you have the opportunity to choose one that best suits the specifics and frequency of your work.
Cable crimping machines - a professional tool for professionals and amateurs
Crimping wires in electrical connectors or collets is an activity that requires a special tool. Only then will we do it precisely and with the desired effect. For this purpose, we use a cable crimping machine which has been used in workshops, electronic plants, electricians, do-it-yourself workshops, production and service facilities. It is especially useful during installation repairs. In order to choose a good crimper, pay attention to the strength of its construction, whether it is made of solid materials and how its individual elements are connected. It must also be comfortable to use, so let the handle be properly contoured and fit into your hand. It is important that it can be used to clamp sleeves and wires of different sizes, because we do not always use the same cables. In addition, you will find hot-air torches in the Botland store. These are used to improve the electrical insulation of cables. So we heat up the heat-shrink sleeves with this device, using high air temperature. This makes the electrical insulation even more durable and effective.