- Reduced price
Description: Filament Fiberlogy Refill Easy PETG 1.75 mm 0.85 kg - Silver
Silver filament made ofEasy PETGmaterial, enriched with glycol. It was vacuum-packed without a spool. It is designed for 3D printers working inFFF/FDMtechnology. The cartridge is chemically and mechanically resistant. The diameter ofthe cartridgeis1.75 mmand the material weight is850 g.
In our offer of filaments you will also find other materials and colors.
Refill ecological pillars
The advantage of the Refill is the lower price and the absence of disposable spools, which are thrown away after each use of the material. The Refill Easy PETG cartridge is designed to be used with Masterspool reusable reel, which can be printed out by itself according toRichPapa's design.This solution makes us care about the environment.
Filament Fiberlogy Refill Easy PETG Silver.
Features of the PETG Fiberlogy Refill
- Odourless
- Highly durable
- Resistant to acids, salts, alkaline substances
- Scratch-resistant
- It has little susceptibility to shrinkage and threading
- The surface of the material is highly glossy
Suggested print parameters for filament
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Fiberlogy pillar
| Parameter | Scope |
|---|---|
| Material | PETG |
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Silver |
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Easy PETG properties graph.
Useful links |
