Description: Filament Fiberlogy Refill Easy PETG 1.75mm 0.85kg - White
White Filament Refill Easy PETG. The Refill seriesoffiltersdo nothave a reel, which reduces the amount of disposableplasticpackaging produced. An alternativeto the classicreels are reusable reels printed on their own, according to their own design or found on the Internet. Easy PETG filaments are primarilycharacterizedby their strength compared to other filaments, the composition of the filament has been enriched with glycol, which further increases the resistance of the filament to chemical agents and physical damage. The diameter of a single thread ofthe filament is 1.75 mm and the weight of the printing cartridge is 850 g. Filament cooperates with all3Dprintersworkingin FFF/FDM technology, which donot haveprotection against the use of third-party filaments.
In our offer of filaments you will also find other materials and colors.
Savings and ecology
The Refill series is a departure from standard solutions with a pre-winded filament on reel. Instead we can use reusable Masterspool reels. We can print such reels ourselves, using ready-made designs, one of such designs is aRichPap userproject recommended by the manufacturer. Lack of reel is primarily environmental protection, by minimizing plastic waste from the printing process. The lack of a spool also translates into a lower price of the filament,because the whole product has less weight than standard cartridges.
Easy PETG filament without a spool.
What distinguishes Easy PETG?
The durability ofPETGfilament translates into its popularity, especially when we talk about the design of housings or everyday objects such as handles or jewellery, additionally shrinkage of the filament and its threading is minimized. Prints from the PETG pillar are also more resistant when exposed to chemicals such asacids, salts and alkalinesubstances.Easy PETG is an easier material to print than regular PETG.
Suggested printing parameters with Easy PETG filament
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Philip specification
| Parameter | Scope |
|---|---|
| Material | PETG |
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | White |
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Properties of Easy PETG filament.
Useful links |
