Filament Fiberlogy Refill Easy PETG 1,75mm 0,85kg - Graphite

Index: FLA-17489 EAN: 5902560995411

Filament Fiberlogy Easy PETG in a seamless version in graphite colour. The material can be used in the work of 3D printers working in FFF/FDM technology. PETG is characterized by increased resistance to mechanical damage and those caused by chemicals.1.75 mmin diameterand 850 g in weight .

Filament Fiberlogy Refill Easy PETG 1,75mm 0,85kg - Graphite
€19.50
€15.85 tax excl.
Available
Shipping in 24 hours
PayPal payment
Fiberlogy Refill Easy PETG 1,75mm 0,85kg - colors:
Manufacturer: Fiberlogy

Description: Filament Fiberlogy Refill Easy PETG 1,75 mm 0,85 kg - Graphite

FilamentFiberlogyEasy PETGin a seamless version in graphite colour. The material can be used in the work of3D printersworking inFFF/FDMtechnology. PETG is characterized by increased resistance to mechanical damage and those caused by chemicals. The diameter of the pillar is1.75 mmand its weight is850 g. The product has been vacuum packed in order to ensure the highest quality.

Filaments

In our offer of filaments you will also find other materials and colors.

Ecology in combination with 3D printing technology

The Refill series of filters do not have a factory spool, on which the manufacturer usually places the material for printing. This is to reduce the amount of plastic waste generated during the printing process. We can successfully place the filter on a reusable spool, which we can print on our own according to designs available on the Internet. In the case ofFiberlogy filaments, the manufacturer recommends using Masterspool reel according toRichRap user's design.

Filament Fiberlogy Refill Easy PETG 1,75 mm 0,85 kg - Graphite.

Fiberlogy Refill Easy PETG 1.75 mm 0.85 kg - Graphite.

Features of PETG filaments

PETGis much more resistant to both chemical and mechanical damage. This type offilamentis odourless, resistant to acids, salts and alkaline substances. Another feature of thePETGpillar is its low susceptibility to shrinkage and threading.

Suggested printing parameters of the filament

Printing temperature From 230°C to 250°C
Table temperature 90°C
Cooling the printout Recommended

Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally.

Fiberlogy Easy PETG filament specification

Parameter Scope
Material PETG
Diameter of pillar 1.75 mm
Dimensional tolerances of the philanthropy +/- 0,02 mm
Colour Graphite
Printing temperature From 230°C to 250°C
Table temperature 90°C
Moisture absorber Yes
Vacuum packing Yes
Roundness +/- 0.01 mm
Packaging dimensions 205 x 205 x 90 mm
Net weight 0.85 kg

Wykres właściwości Easy PETG

Easy PETG filament properties chart.

Colour graphite
Mass 850 g
Filament - material PETG
Filament - diameter 1.75 mm
Filament - Szpula Refill
Package width 21.5 cm
Package height 5.5 cm
Package depth 21 cm
Package weight 1 kg

Be the first to ask a question about this product!

Product reviews

Filament Fiberlogy Refill Easy PETG 1,75mm 0,85kg - Graphite

5/5

Average grade

2

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Michał 09.01.2024 Confirmed purchase Translated review
everything's fine
Adam 26.02.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: