Product description: Rosa3D PETG Standard Filament 1.75 mm 1 kg - included with a reusable spool - Black
Filament (polyethylene terephthalate with glycol admixture) in black . During printing, PETG Standard demonstrates good adhesion of the first print layers to the heating bed surface, does not emit an unpleasant odor, and has low shrinkage. Finished 3D models made from this material are characterized by high detail and chemical resistance. They can be subjected to further processing (sandblasting, sawing). The filament diameter is 1.75 mm . The thermoplastic weight on a reusable spool is 1 kg .
Our range of filaments also includes other materials and colors.
Filaments used in 3D printing .
Additional information about PETG Standard
- Due to its ease of printing, the filament is an optimal solution for both beginners and more advanced users.
- It does not emit an unpleasant odor during printing.
- PETG Standard shows good adhesion of the first print layer to the heating bed
- High accuracy and detail of 3D printed models
- The filament is made from ingredients approved for food contact. However, it's important to remember that for products that come into contact with food, certification is the responsibility of the final product manufacturer.
- Finished models made from PETG Standard are highly chemically resistant. They can be further processed (sandblasted, drilled, sawn, ground, cut, painted) without compromising the structural integrity of the element.
| Head temperature | From 220°C to 260°C |
| Table temperature | From 60°C to 80°C |
| Print cooling | From 20% to 30% |
| Recommended print speed | From 60 mm/s to 80 mm/s |
Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
Rosa3D PETG Standard Filament 1.75 mm 1 kg - included with a reusable spool - Black.
Technical specifications of the PETG Standard filament
| Parameter | Range |
|---|---|
| Filament type | PETG |
| Filament dimensional tolerance | +/- 0.05 mm |
| Oval dimensional tolerance | +/- 0.02 mm |
| Heat distortion temperature | 78°C (ISO 306) |
| Density | 1.29 g/ cm3 |
| Tensile strength (break) | 20 MPa (ISO 527-2) |
| Elastic modulus | 2980 MPa (ISO 572-2) |
| Izod impact strength (notched) | 4.7 kJ/ m2 (ISO 180) |
| HDT | 78°C (ISO 306) |
| Flame rating | V2 UL94 (4.0mm) |
| Smell | odorless |
| Spool | reusable |
| Spool diameter | 200 mm |
| Spool width | 55 mm |
| Mounting hole diameter | 52 mm |
| Vacuum packaging | Yes |
| Moisture absorber | Yes |
| Product weight | 1kg net |
