- New
Product description: Creality CR-PETG Refill Filament 1.75 mm 1 kg - Blue
Filament from Creality in blue is a CR-PETG Refill material designed for 3D printing of functional, technical, and decorative parts. The refill has a weight of 1 kg and a diameter of 1.75 mm. The Refill version is supplied without a spool, so the filament must be mounted on a compatible reusable spool before use.
PETG combines ease of printing with higher mechanical strength than PLA. The material has good tensile strength, low shrinkage, and is well suited for producing parts exposed to everyday use. Thanks to its resistance to weather conditions and chemicals, it can be used to manufacture containers, enclosures, holders, organizers, and structural components. The product is compatible with printers that do not have restrictions preventing the use of third-party filaments.
The product is supplied as a Refill - without a spool. A compatible reusable spool is required for proper use.
Creality CR-PETG Refill Filament 1.75 mm 1 kg - Blue.
The Refill version reduces waste and allows a compatible spool to be reused.
Properties of CR-PETG Refill filament
- Higher physical and chemical resistance than PLA
- Good layer adhesion for precise and durable prints
- Easy printing and low material shrinkage during printing
- Resistance to weather conditions and selected chemicals
- Refill version supplied without a spool, designed for use with a compatible reusable spool
Our range also includes other PETG filaments - check them out!
Suggested filament printing parameters
| Nozzle temperature | From 230°C to 250°C |
| Build plate temperature | From 60°C to 80°C |
| Print cooling | Optional |
Due to differences in printer design, the above values should be treated as guidelines, and the appropriate settings should be determined experimentally.
Our filament range also includes other materials and colors.
| Technical specifications of CR-PETG filament | |
|---|---|
| Filament type | CR-PETG |
| Color | Blue |
| Filament diameter | 1.75 mm |
| Printing speed | from 30 mm/s to 200 mm/s |
| Density | 1.27 g/cm³ |
| Spool | Refill |
| Weight | 1 kg |
Filaments are hygroscopic, meaning they absorb moisture. Therefore, opening the hermetically sealed vacuum packaging permanently reduces the quality and value of the product. For this reason, if an opened product is returned, the refund amount will be reduced proportionally. Exceptions apply to returns resulting from manufacturing defects in the material, e.g. if the filament is damaged or cut. Please carefully check the color and material type on the label before opening the packaging.
