- New
Product description: Filament Creality CR-PETG Refill 1.75 mm 1 kg - Army Green
Creality 's green CR-PETG Refill filament is designed for 3D printing functional, technical, and decorative parts. The refill weighs 1 kg and has a diameter of 1.75 mm . The Refill version is supplied without a spool , so the filament must be mounted on a compatible reusable spool before use.
PETG combines ease of printing with higher mechanical resistance than PLA. The material is stretch-resistant, has low shrinkage, and is well-suited for creating components exposed to everyday use. Its resistance to weather and chemicals makes it suitable for the production of containers, enclosures, handles, organizers, and structural elements. The product is compatible with printers that do not have restrictions that prevent the use of filaments from third-party suppliers.
This product is supplied as a Refill cartridge – without a spool. A compatible reusable spool is required for proper use.
Filament Creality CR-PETG Refill 1.75 mm 1 kg - Army Green. 
The Refill version reduces waste and allows you to reuse a compatible spool.
CR-PETG Refill filament properties
- Higher physical and chemical resistance than PLA
- Good adhesion between layers allows for accurate and durable prints.
- Easy printing and low material shrinkage during operation
- Resistance to weather conditions and selected chemical substances
- Refill version supplied without spool, intended for use with a compatible refill spool
We also offer other PETG filaments - check them out!
Suggested filament printing parameters
| Head temperature | From 220°C to 250°C |
| Table temperature | From 70°C to 80°C |
| Print cooling | Optional |
Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally.
Technical specifications and physical properties of Creality CR-PETG Refill filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.03 mm |
| Color | Army Green |
| Printing temperature | From 230°C to 250°C |
| Table temperature | From 60°C to 80°C |
| Material | CR-PETG |
| Product format | Refill - cartridge without spool |
| Spool included | NO |
| Tensile strength | 49 MPa |
| Mass | 1 kg |
Filaments are hygroscopic, meaning they absorb moisture. Therefore, breaching the airtight vacuum seal permanently reduces the quality and value of the product. Therefore, if you return an unpacked item, your refund amount will be reduced proportionally. Returns resulting from manufacturing defects, such as damaged or cut filaments, are an exception. Please carefully verify the color and material type on the label before opening the packaging.
