- New
Product description: Filament Rosa3D Refill PETG Standard HS 1.75 mm 1 kg - White
The Refill version of the PETG Standard HS filament from Rosa3D is a universal white 3D printing material that combines the durability of PETG with ease of printing and high surface quality. High Speed (HS) technology enables printing at higher speeds without compromising quality or layer consistency. The material is characterized by good mechanical strength and flexibility , reducing the risk of cracking and increasing the durability of prints. The Refill version helps reduce waste and lower operating costs. Additionally, the material has a V2 flammability rating, which increases safety. The filament diameter is 1.75 mm and weighs 1 kg . The filament is equipped with an NFC TigerTag , which allows for quick reading of key material parameters using a smartphone. This gives you instant access to information such as printing temperatures, material type, and recommended settings.
Rosa3D Refill PETG Standard HS filament 1.75 mm 1 kg - White.
Filament Refill in white.
Properties of PETG Standard HS filament
- High mechanical strength : ensures resistance to damage and long life of prints
- Material flexibility : reduces the risk of cracks and brittleness of components
- High Speed Technology : enables high-speed printing without compromising surface quality
- Good thermal resistance : the material remains stable up to approximately 70-80°C
- High impact strength : provides resistance to impacts and dynamic loads
- Good layer adhesion : guarantees the structural integrity of prints
- Low shrinkage : reduces deformation during printing
- Flammability class V2 : the material is self-extinguishing after the fire source is removed
Suggested filament printing parameters
| Head temperature | From 220°C to 250°C |
| Table temperature | From 60°C to 80°C |
| Print cooling | From 0% to 60% |
Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
| Technical specifications of PETG Standard HS filament | |
|---|---|
| Filament type | PETG Standard HS |
| Color | White |
| Filament diameter | 1.75 mm |
| Dimensional tolerance | +/- 0.05 mm |
| Thermal resistance | 68°C |
| Density | 1.29 g/ cm3 |
| Spool | Refill |
| Mass | 1 kg |
