Bonding is the simplest and most universal method of joining two elements together and mounting one to a selected surface. It is a kind of chemical connection by means of organic or inorganic substance. For bonding, a preparation is used - an adhesive, the main component of which is a binder responsible for giving the joint adhesion to the elements being joined together. The binder also increases mechanical resistance. Depending on the purpose, the adhesives contain additional components, including fillers and solvents. Adhesives can be divided into several categories. There are curable and solvent-based adhesives, liquid, plastic and solid. Properly selected adhesive for specific surfaces and environmental conditions is a guarantee of effective bonding and adhesion. You need to know that not everyone will be a good solution in all cases. In our offer you will find a wide range of adhesives and fusing presses. They have been selected in terms of their properties and intended use concentrated around prototyping and repairs in workshop and home conditions.
- New
- Reduced price
- Promotion
LilyTiny microcontroller ATtiny85 - programming - SparkFun DEV-10899
Index: SPF-04287
- Reduced price
- Promotion
BBMagic BBMobile - Bluetooth LE module for Arduino, STM, ARM, AVR
Index: BBM-19294
- On sale!
- Promotion
ON-OFF switch monostable - PBW-16BPD - 2A 250V - flat green point
Index: AKS-10817
- Reduced price
- Promotion
- Reduced price
- Promotion
Loading...
Accelerator for CA Joker glue - 200 ml
Spray activator for cyanoacrylate adhesives. Immediately cures the bonding point. Capacity 200 ml.
Index: CHE-02267
Index: CHE-02267
Super thin cyanacrylic glue Joker- 20 g
Cyanoacrylate glue of very rare consistency, in several seconds will glue together metal, glass, wood, rubber, plastic (small amounts), ceramic surfaces, EPP and other materials.
Index: CHE-01007
Index: CHE-01007
Poxipol glue transparent - 14ml
An adhesive with the characteristics of a metallic binder. Resistant to water, acids, solvents, etc. Inlaid in two mixing tubes. It gets hardness in 10 minutes. Capacity: 2 x 7...
Index: CHE-06722
Index: CHE-06722
AG TermoGlue thermo-conductive adhesive. Package contains 10 g of adhesive.
Index: CHE-02003
Index: CHE-02003
Dense cyanacrylic glue Joker - 20g
Cyanoacrylate glue of thick consistency, in seconds will glue together metal, glass, wood, rubber, plastic (small amounts), ceramic surfaces, EPP and other materials.
Index: CHE-01005
Index: CHE-01005
Thin cyanacrylic glue Joker - 20 g
Cyanoacrylate glue of rare consistency, in several seconds will glue together metal, glass, wood, rubber, plastic (small amounts), ceramic surfaces, EPP and other materials.
Index: CHE-01008
Index: CHE-01008
A popular cyanoacrylate-based adhesive, it instantly bonds plastic, metal, wood, leather, rubber, glass, porcelain and paper.
Index: CHE-01366
Index: CHE-01366
Dense cyanacrylic glue Joker - 50g
Joker cyanoacrylate glue with a thick consistency , in a few to several dozen seconds will glue materials such as metal, glass, wood, rubber, plastic (small quantities),...
Index: ANF-18451
Index: ANF-18451
Hot glue 11,2/200 mm - 100g - 5pcs.
Adhesive gun insert 11,2/200 mm (thick) transparent. Weight: 100 g. Price for 5 pieces.
Index: CHE-06760
Index: CHE-06760
Hot glue 11,2/200mm Megatec - black - 5pcs
Black refill for hot glue guns. The glue has a diameter of 11.2 mm and a length of 200 mm . The set includes 5 pieces of cartridges.
Index: LUK-22815
Index: LUK-22815
Hot glue 11,2/200mm Megatec - green - 5pcs
Green refill for hot glue guns. The glue has a diameter of 11.2 mm and a length of 200 mm . The set includes 5 pieces of cartridges.
Index: LUK-22820
Index: LUK-22820
- Reduced price
- Promotion
Glue Gun Stick 7x150 mm - transparent - 5 pcs.
Cartridge for glue gun 7 x 150 mm (thin) transparent. Price for five pieces.
Index: CHE-00896
Index: CHE-00896
- Reduced price
- Promotion
Hot glue 11,2/200mm Megatec - yellow - 5pcs
Yellow refill for hot glue guns. The glue has a diameter of 11.2 mm and a length of 200 mm . The set includes 5 pieces of cartridges.
Index: LUK-22817
Index: LUK-22817
- Reduced price
- Promotion
Hot glue 11,2/200mm Megatec - blue - 5pcs
Blue refill for hot glue guns. Megatec's adhesive has a diameter of 11.2 mm and a length of 200 mm . The set includes 5 pieces of cartridges for the gun.
Index: LUK-22819
Index: LUK-22819
Hot glue 11,2/200mm Megatec - red - 5pcs
Red cartridge for hot glue guns. The glue has a diameter of 11.2 mm and a length of 200 mm . The set includes 5 pieces of cartridges.
Index: LUK-22818
Index: LUK-22818
- Reduced price
- Promotion
A popular cyanoacrylate glue, it glues together in seconds: metal, leather, porcelain, rubber, wood, ceramics and plastic. It strengthens and secures screws and nuts.
Index: CHE-01367
Index: CHE-01367
A popular gel adhesive based on cyanoacrylate, it glues: metal, leather, porcelain, rubber, wood, ceramics and plastic in an instant. Strengthens and secures screws and nuts....
Index: CHE-01776
Index: CHE-01776
Gluetec 1020 glue gun - Megatec
Hot melt glue gun. The device operates at a temperature of 165°C. It heats up the glue in just 5 minutes , making working with it quick and convenient. The gun uses...
Index: LUK-22853
Index: LUK-22853
Hot melt glue gun 60 W. Refillable with 11,2 mm diameter cartridges.
Index: NSZ-08526
Index: NSZ-08526
Hot glue 11,2/200mm Megatec - various colours - 5pcs
Cartridges for guns that use hot glue to connect elements. The glue has a diameter of 11.2 mm and a length of 200 mm . The set includes 5 cartridges - white, orange, gold,...
Index: LUK-22816
Index: LUK-22816
Gluetec 1060 glue gun - Megatec
Hot melt glue gun. The device operates at a temperature of 193°C. It heats up the glue in just 5 minutes , making working with it quick and convenient. The gun uses standard...
Index: LUK-22851
Index: LUK-22851
Gluematic 3002 glue gun - Steinel
An efficient Steinel gun designed for hot gluing . The device quickly reaches a temperature of 206°C and is ready for use in just 7 minutes . It uses glue inserts with a...
Index: LUK-24693
Index: LUK-24693
Long Trigger Glue Gun - 100W - ZD-8A
Hot melt glue gun with 100 W. Refillable with 11.2 mm diameter cartridges. Glue gun dimensions are 17 x 16 x 3 cm.
Index: NSZ-08527
Index: NSZ-08527
Xtreme brand glue heating gun, designed for hot gluing at a temperature of 206°C . The device heats up in 7 minutes , and the high power of 200 W makes this gun perfect...
Index: PRO-25131
Index: PRO-25131
See also
Glue and bonding machines for various applications
The Botland store offers more and less versatile adhesives, which can be used in everyday repairs as well as in specialist projects. The available adhesives include products containing cyanoacrylate. We can find it in adhesives of different consistencies, both rare and dense. We can find it, among others, in Super Glue, which is one of the best known adhesives, with universal use and relatively high efficiency. These types of adhesives are characterized by a very short bonding time. This process can be further accelerated, which is used by professional electronics. A spray activator is designed for this purpose. If you are gluing larger elements with uneven surfaces and shapes, it is worth to opt for epoxy resins. Before using the adhesive on a particular surface for the first time, always check its action in an invisible place. If there are no undesirable reactions, you can use the adhesive for the right work.
If you often work with glue and use it in larger quantities, and you want high precision, use a fusing press, a commonly known glue gun. In order to use it, you will need a cartridge, i.e. a special glue in a stick, which we place in the indicated place. There is a mechanism that pushes the glue towards the heated head. Through it, the glue gets out. Once it has cooled down, the connection is durable, but relatively flexible. Fusing machines are also well suited for joining elements that do not come into contact with each other.
Effective bonding
How durable a bond is achieved depends on the properties of the selected adhesive as well as the environmental conditions and the correctness of the process. It happens that the elements connected together can be easily separated, despite its very good properties. The reason for this is usually a bad fit of the adhesive type to the surface or simply the application. For uneven surfaces it is best to use a dense adhesive, the liquid will not "stop" in unevenness, it will influence them. However, a rare texture is a good choice when bonding details with smooth surfaces. We also focus on the flexibility of the glue. If the parts are under stress and vibration, a two-component adhesive or an epoxy resin should be chosen. There are also materials that are resistant to adhesive and will not adhere to it. These include silicone and teflon. In such cases it is necessary to use dedicated substances which are based solely on their unique properties and characteristics.
We offer a wide range of adhesives that have found application in both everyday and professional use. These are adhesives of dense and rare consistency, two-component agents and epoxy resins. Moreover, there are fusing machines at your disposal, which improve the process of joining elements.