Product description: Rosa3D Refill PETG CarbonLook Filament 1.75 mm 1 kg - included with a reusable spool - Black
Black PETG filament (polyethylene terephthalate with a glycol admixture). Contains carbon fibers , allowing us to print models with a satin finish and barely visible layers. A slight transparency effect can be achieved with thin-walled prints. CarbonLook PETG filament is characterized by good interlayer adhesion and low stringing. Used in 3D printers using FFF/FDM technology. The material is factory-wound on a spool and vacuum-packed, so it does not require a closed chamber . The package contains 1 kg of filament , and its diameter is 1.75 mm .
Our range of filaments also includes other materials and colors.
Rosa3D Refill PETG CarbonLook Filament 1.75 mm 1 kg - included with reusable spool - Black.Filament Application
- Prototyping
- Large format prints
- Housings/Lampshades
- Decorations
Properties of PETG CarbonLook
- Excellent adhesion between layers
- Satin print surface
- Odorless
- It does not show shrinkage and does not require a closed chamber.
- High precision of prints
- Easy printing
- Chemical resistance
An example model printed with Rosa3D PETG CarbonLook filament.
Suggested printing parameters
| Print temperature | from 225°C to 250°C |
| Table temperature | from 60°C to 80°C |
| Cooling | from 0% to 60% |
Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally.
Technical specifications and physical properties of Refill PETG CarbonLook
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Color | Black |
| Print speed | From 60 mm/s to 80 mm/s |
| Printing temperature | From 225°C to 250°C |
| Table temperature | From 60°C to 80°C |
| Material density | 1.29 g/cm³ |
| Material | PETG CarbonLook |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Net weight | 1 kg |
