- New
Product description: 3D printer resin - FormFutura Economy LCD Resin - 1L - Yellow
Yellow resin from FormFutura , used as a material for forming prints in resin printers equipped with a DLP or LCD projector. The UV curing wavelength ranges from 385 nm to 420 nm . Prints obtained using FormFutura Economy LCD are characterized by accuracy and a matte finish. The package contains 1 L of product. When grinding finished resin prints, it is absolutely necessary to remember to protect the respiratory tract.
Always wear protective equipment such as safety glasses and nitrile gloves when working with resins.
Sample printout.
3D printer resin - yellow.
Things to do before printing
- Shake the bottle for at least 2 minutes before each use
- Leave the resin for 10 minutes to release any air bubbles.
- Once printing is complete, the resin can be poured back into the bottle
Final processing of the finished 3D print
- The finished model should be rinsed in isopropyl alcohol (IPA) or bioethanol for about 5 minutes.
- The manufacturer recommends using an ultrasonic cleaner
- Before further curing, check that the model is completely dry after rinsing.
- Place the rinsed items in a well-ventilated area for at least 30 minutes (compressed air can also be used for at least 2 minutes).
- Items should be cured in a special chamber for 20 to 30 minutes at a temperature of 65°C.
- The recommended curing wavelength is 300 nm to 410 nm.
- When sanding resin, it is absolutely necessary to remember to protect the respiratory tract.
FormFutura resin technical specifications
- UV curing wavelength: 385 nm to 420 nm
- Impact test: 17 kJ/m 2
- Deformation temperature: 63.5°C
- Density: 1.21 g/cm 3
- Tensile strength: 50 MPa
- Elongation at break: 5%
- Capacity: 1 L
- Color: yellow
3D printer resin - FormFutura Economy LCD Resin - 1 L - Yellow.
Useful links |
