Description
Module that allows to reduce the energy consumption of any project because of its cyclic setting of the sEnable pin's status. It works with delays from the "every 100 ms" to "every 2 hours". It is powered with the voltage from 3 V to 5 V.
The module has integrated potentiometer for determining the delay of the activation of the system. In addition, there is the possibility of turning it on by using an external resistor or through the built-in button. TPL5110 also has an input from the controlled device for the information about the finished work. This ensures that the shutdown will not occur during operation of the system.
Module TPL5111 controls the power by setting the Enable pin of the target device andmodule TPL5110controls the target system through a power outage. TPL5111 should be used with devices that have an Enable pin that can be controlled.
|
The product is compatible with Arduino For facilitating the of use this module, manufacturer has prepared a user manual along with a sample program for Arduino. |
Connection
The module has 5 outputs in the form of the holes. The kit also includes a goldpin strap (for self-soldering).
| Name |
Description |
|---|---|
| VDD |
Supply voltage from 3 V to 5 V. |
| GND |
The groound of the system. |
| Delay |
Pin setting the delay through the resistor. By default, it is connected to the built-in potentiometer. |
| ENout |
Pin Enable Output. Pin controlling the target device. |
| Done |
Input pin from the controlled device, informing about the finished work and the permission to disconnect. |
Specification
- Supply voltage: 3 V to 5 V
- Delay is set via potentiometer or external resistor
- Current consumption during the power-down mode: 20 µA approx.
- Dimensions: 19.5 x 17.8 x 5 mm
- Weight: 1.4 g
Useful links |
