Product description: Devil Design ABS+ 1.75 mm 0.8 kg - Natural
Devil Design's ABS+ filament is a thermoplastic filament designed as a cartridge for FFF 3D printers and printing pens . The filament is wound on a spool and vacuum-sealed with a moisture absorber.
Our range of filaments also includes other materials and colors.
Devil Design ABS+ filament 1.75 mm 0.8 kg - Natural.
Each spool contains 0.8 kg net of filament . It can be used in all FFF printers that are not protected against the use of material from a third-party supplier or open-source construction. ABS+ is easily machined, such as sanding or drilling, and is soluble in acetone .
Properties of ABS
- There is a smell of melting plastic while printing
- More durable than PLA
- Melting temperature: from 180°C to 220°C. It is very important to choose the appropriate temperature specified by the manufacturer
- Easy to sand, you can drill holes in it without any problems
- It is cheap and comes in many color variants.
Our offer also includes other colors of ABS filament .
Suggested filament printing parameters
| Head temperature | from 230°C to 240°C |
| Table temperature | from 90°C to 100°C |
| Print cooling | Not recommended |
| Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
Technical specifications and physical properties of Devil Design ABS+ filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Filament roundness | +/- 0.02 mm |
| Material surface | Gloss |
| Material shrinkage | Big |
| Product weight | 0.8 kg |
| Material | ABS |
| Weight of empty spool | ~ 250 g |
| Spool diameter | 200 mm |
| Spool width | ~ 70 mm |
| Mounting hole diameter | 52 mm |
| Packaging | Cardboard with print |
| Package dimensions | 205 x 205 x 80 mm |
| Vacuum packaging | Yes |
| Moisture absorber | Yes |
Useful links
|
