- New
Product description: Rosa3D Refill ABS+ filament 1.75 mm 1 kg - Matt Black
Rosa3D 's matte black filament , wound on a spool, weighs 1 kg and has a diameter of 1.75 mm . ABS + is a material characterized by high impact resistance . The print surface has an elegant, semi-matte finish. The material can be smoothed with acetone. The printing process should be performed in a well-ventilated room due to an unpleasant odor during printing .
Rosa3D ABS+ filament 1.75 mm 1 kg - White. 
Resistant to UV radiation and high temperatures.ABS+ properties
- Good adhesion between layers allows for detailed prints
- Resistance to high temperatures
- High impact resistance
- Semi-matte finish
- Can be smoothed with acetone
Application of ABS+
- Machine part prototypes, gadgets, exhibition models
- Parts in electronics
- Computer parts
- Toys such as blocks, car parts and educational aids
Suggested filament printing parameters
| Printing temperature | From 230°C to 270°C |
| Table temperature | From 80°C to 110°C |
| Print cooling | From 50% to 100% |
Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally.
Technical specifications and physical properties of the ABS+ filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75 mm |
| Color | Matt Black |
| Material | ABS+ |
| Elastic modulus | 2276 MPa |
| Tensile strength | 67 MPa |
| Tensile elongation | 2.5% |
| Filament dimensional tolerance | +/- 0.05 mm |
| Density | 1.05 g/cm3 |
| Smell | Irritant |
| Head temperature | From 230°C to 270°C |
| Table temperature | From 80°C to 110°C |
