- New
Product description: WisBlock LPWAN RAK4630-EU868-IPEX - LoRaWAN + Bluetooth module - RAK Wireless 105010
WisBlock RAK4630-EU868-IPEX is a compact LPWAN module from Rak Wireless designed for IoT applications requiring reliable and energy-efficient communication. By integrating the Nordic nRF52840 microcontroller and the Semtech SX1262 LoRa transceiver, the module supports both Bluetooth 5.0 and LoRaWAN 1.0.3 , enabling flexible use in various projects. Its small size (23 x 15 mm) and IPEX connector for connecting the antenna make it an ideal choice for designers looking for efficient and compact communication solutions.
WisBlock LPWAN RAK4630-EU868-IPEX - LoRaWAN + Bluetooth module - RAK Wireless 105010.
WisBlock Series
WisBlock series modules are a solution developed by Rak Wireless , which allows for the creation of extensive IoT projects . They are not only used for rapid prototyping, but are also intended for the creation of industrial applications. The WisBlock system consists of: WisBlock Base Board , WisBlock Core development module, WisBlock Sensors and WisBlock IO expansion modules.
Main Features of the WisBlock LPWAN RAK4630-EU868-IPEX Module
- LoRaWAN 1.0.3 (Class A, B and C) and Bluetooth 5.0 support
- Low power consumption: 4.23 µA in sleep mode
- High transmit power: up to 22 dBm for LoRa
- Wide operating temperature range: from -40°C to 85°C
- Multiple interfaces: UART, I2C, SPI, ADC, USB, GPIO
- IPEX antenna connector for design flexibility
- Compact dimensions: 23 x 15 x 3 mm
Please remember to make sure that the antennas are properly connected to the IPEX connectors before connecting the module to the power supply. The absence of antennas during module operation may lead to damage to the RF section.
Compatible antennas (not included):
WisBlock LPWAN RAK4630-EU868-IPEX - LoRaWAN + Bluetooth module.
Pinout of the RAK4630 module from RAK Wireless.
RAK4630 module pinouts
- VBUS
- USB-
- USB+
- P0.13/I2C_SDA
- P0.14/I2C_SCL
- P0.15/UART2_RX
- P0.16/UART2_TX
- P0.17/UART2_DE
- P0.19/UART1_RX(AT Command)
- P0.20/UART1_TX(AT Command)
- P0.21/UART1_DE
- P0.10/NFC2
- P0.09/NFC1
- GND
- RF_BT
- GND
- NRF_RESET
- SWDCLK
- SWDIO
- VBAT_SX
- VBAT_IO_SX
- GND
23.P0.24/I2C_SDA_2
24.P0.25/I2C_SCL_2
25. P1.01/SW1
26. P1.02/SW2
27. P1.03/LED1
28. P1.04/LED2
29.P0.03/QSPI_CLK
30.P0.02/QSPI_DIO3
31.P0.28/QSPI_DIO2
32.P0.29/QSPI_DIO1
33.P0.30/QSPI_DIO0
34. P0.26/QSPI_CS
35. GND
36. GND
37. RF_LoRa
38. GND
39. P0.31/AIN7
40. P0.05/AIN3
41. P0.04/AIN2
42. GND
43. VDD_NRF
44. VBAT_NRF
Pinout of the RAK4630 module from RAK Wireless.
WisBlock LPWAN - RAK4630-EU868-IPEX - RAK4630 WisDuo LPWAN+BLE module - RAK Wireless 105010.
RAK4630 WisDuo LPWAN+BLE Specification
- Compatible with WisBlock series
- Chip: nRF52840
- Ultra-low power MCU
- processor: ARM Cortex-M4F CPU 32-bit
- processor clock speed: 64 MHz
- Flash Memory: 1MB
- RAM: 256 KB
- System: LoRa SX1262
- low power consumption, wide range
- LoRa transceiver
- Number of pins: 44
- I/O Ports: UART/I2C/GPIO/USB
- Antenna connector type: IPEX
- Supported protocols: LoRaWAN 1.0.3 and Bluetooth Low Energy 5.0
- Supported Bands: IN865, EU868, AU915, US915, KR920, RU864 and AS923
- SPI pins and optional NFC interface are accessible via WisBlock IO module
- Supply voltage: 2 V to 3.6 V
- Bandwidth of supported wireless systems: 7.8 kHz to 500 kHz
- Power consumption: 4.23uA in sleep mode
- LoRa PA Boost Mode Output Power: 22 dBm
- Interface: Serial Wire Debug (SWD)
- Software: RUI3
- Operating temperature: -40°C to 85°C
- Dimensions: 15 x 23 x 3 mm
