List of products by brand Seeedstudio - Strona 2
Grove - relay 1 channel - 30A-250VAC / 30VDC contacts - 5V coil
Module with relay that control the actuators consuming the current of up to 30 A for the voltage of 250 V AC, 30 V DC using the ports of the microcontroller. The module is...Grove - RPR-220 reflectance sensor v1.3
Grove series module based on the RPR-220 reflective sensor . It consists of an infrared light emitting diode and a high-sensitivity phototransistor. It is powered by 5 V....Grove - RGB LED Ring WS2813 x 24 LEDs - 70mm - Seeedstudio 104020168
The module in the form of a ring with a diameter of 70 mm equipped with 24 RGB LEDs with the WS2813 controller. Each of the diodes can be individually addressed. The ring...Grove - LS06-S ambient light sensor v1.1
Module from the Grove series is equipped with a sensor LS06-S. The s ensor allows to determine the intensity of the light and reflects the analog voltage signal back to...Grove - PCA9685 - 16-channel server driver, 12-bit PWM I2C
A 16-channel PWM generator useful when there is no microcontroller output. It allows, among others: controlling servomechanisms, adjusting motor speed or changing LED...Grove - 10kΩ linear sliding potentiometer
Sliding linear potentiometer with a resistance of 10 ohms. Itas a 4-pin Grove connector. The kit includes a cable adapted to Seeedstudio Base Shield v2.0.Grove - mini limit sensor with roller
Module from the Grove series equipped with a limit switch with lever ended with roller. Working voltage is 3.3 V and 5 V. T he kit includes a cable adapted to Seeedstudio Base...Mobile spectrum analyzer RF Explorer ISM Combo Plus - Slim
A small, powerful spectrum analyzer operating in the 50 kHz band and from 2.34 GHz to 2.55 GHz, enabling scanning of the popular 2.4 GHz frequency. The Slim version has...Grove - CO2 & Temperature & Humidity Sensor (SCD30)
The Grove module from Seeed Studio is equipped with a sensor of humidity, temperature and carbon dioxide. (SCD30) is a high precision carbon dioxide sensor based on Sensirion...Grove - Temperature, Humidity, Pressure and Gas Sensor BME680 I2C/SPI
The BME680 sensor module allows you to measure temperature, humidity, pressure and gas simultaneously. The board is equipped with a Grove connector. It communicates via I2C or...Grove - 125kHz RFID reader with antenna - Seeedstudio 113020002
Easy to use module of RFID reader with UART and Wiegand interface. Works with UEM4100 RFID modules. The kit includes antenna which allows you to communicate in a range up to 7...Grove ESP8285 V2 - WiFi UART module
Grove Wi-Fi module based on a ESP8285 system with built-in TCP/IP and support AT commands. It supports the most popular protection, such as WEP, WPA/WPA2, TKIP, AES and WAPI....Grove - NFC module v1.1 with antena
The module is equipped with PN532 transmitter-receiver system providing wireless communication in 13.56 MHz band. It communicates via UART ( default) and I2C interfaces ....Grove - a set of 5 female-female 4-pin - 2mm/5cm cables with a latch
A set of five 4-pin wires Grove. They are used to connect Grove sensors with Base Shield Board v2. Wire length is 5 cm. Version with lock.Grove - temperature and humidity sensor DHT22 (AM2302)
Module with temperature and humidity sensor with a digital single-wire interface. Measuring range: temperature -40 °C to +80 °C, humidity is from 0% to 100 % RH.Grove ADS1115 - 4-channel 16-bit ADC for Raspberry Pi - Seeedstudio 103030279
Grove 4-channel 16-bit ADS1115 ADC is an analog-digital converter (ADC) in the form of shield for GPIO connectors of Raspberry Pi. It is 4-channel ADC based on the ADS1115...Grove - air purity sensor MP503 v1.3
Air purity sensor from Groveseries. It is used for detecting slightly toxic gases such as carbon monoxide, alcohol, acetone, thinner, formaldehyde and other.Grove - gesture sensor PAJ7620U2 - 5V I2C
Module from the Grove series, is equipped with a gesture sensor PAJ7620U2 with I2C interface. It can recognize 9 basic gestures. It is powered with the voltage of 5 V. It has a...Grove - RGB LED strip WS2813 - digital, addressed - IP65 30LED/m, 9W/m, 5V - 1m
RGB LED bar with Grove connector is equipped with digital, individually addressed WS2813 diodes in density of 30 pcs. per meter. The diodes have been sealed with a layer of...
