USB-UART converters are integrated circuits that enable efficient and undisturbed communication. They are designed to exchange information, which is possible due to asymmetric transmission. Data is received through the serial port. Functioning of the USB-UART converters starts with a start bit, which has the form of logical zero. In subsequent stages 7,8 and 9 bits are transferred. However, the number of bits depends on the configuration of the device. The information ends with the stop bit, which is always the only logical one. The whole information is called a UART frame.
UART / RS232 / RS485 Converters
Converter USB-UART FTDI FT232RL - USB plug - Waveshare 6170
Converter which provides communication between the serial interfaces USB and UART. Allows to exchange data between the computers and the systems which use microcontrollers....USB-UART converter D-Sun PL2303
Converter which provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....USB-UART TTL converter FT232 - USB type C socket - Waveshare 20646
This module is equipped with a converter that allows communication between USB and UART serial interfaces on TTL level. It has built-in FT232 chip and operates with...USB adapter for female cables with USB-UART converter PL2303 - Waveshare 7965
The adapter allows you to connect a USB to many different modules, with built-in converter USB to UART PL2303. Completed with female wire connectors. The system is compatible...RS485 - Ethernet converter - Cortex M0 - Waveshare 16529
Device that allows communication between RS485 and Ethernet RJ45 interface. Module can be configured by web page, AT commands, serial protocol and network protocol. It is...USB Converter - RS232 COM - AK50 CH341
Adapter that allows you to connect devices with a RS232 connector to the computer through the USB connector. The module is based on a system of CH341. It is displayed in the...RS485 CAN HAT - overlay for Raspberry Pi - Waveshare 14882
Shield for Raspberry Pi, version 4B / 3B+ / 3B / 2B / Zero / Zero W with system SN65HVD230 which allows communication between CAN and SPI and the SP3485 system that...Converter USB-RS485 - FTDI, FT232RL
Converter allows you to connect to a computer or microcontroller, the RS-485 bus which supports up to 32 devices on a line with length of up to 1 km, with a speed up to 10...FT232H - USB converter for UART, SPI, I2C, GPIO - Adafruit 2264
Board allows you to communicate with the modules and sensors directly from the computer. It supports the most popular interfaces: UART, I2C, SPI, it also has some GPIO pins.Converter USB-UART FTDI FT232RL - miniUSB socket - Waveshare 6646
Converter provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The...Converter RS232 - UART with connector DB9 - MAX3232 3,3V/5V
RS232 to UART serial interface converter with 9-pin D-SUB connector . The implementing circuit is the popular MAX3232.USB-UART converter CP2102 - USB plug - Waveshare 11079
Converter which provides communication between the serial interface, USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....Transceiver Breakout MAX3232 3,3V/5V - RS232 - UART converter - SparkFun BOB-11189
RS232 serial interface converter to UART standard. The implementing circuit is the popular SP3232 compatible with MAX3232 . Module works with voltage range from 3,0 V to...USB-UART (TTL) converter - PL2303 - USB plug A - V2 version - Waveshare 20265
A communication module in the form of a converter that enables communication between USB and UART serial interfaces. It allows the exchange of data between the computer and...MSX FT232RL - USB-UART FTDI 3,3/5V converter
The converter allows for communication between USB and UART interfaces. It allows to exchange data between PC and board with microcontroller. The module is based on...UART converter - RS485 5V - ARK/RJ11 - Waveshare 4738
Converter allows you to connect the microcontroller via the RS-485 bus which supports up to 32 devices on a line with length up to 1 km and a speed up to 10 Mbps. The module...UART Converter - RS485 3.3V - ARK/RJ11 - Waveshare 4777
Converter allows you to connect the microcontroller via the RS-485 bus which supports up to 32 devices on a line length up to 1 km with a speed up to 10 Mbps. The module is...Converter USB-UART CH343 - USB type A plug - Waveshare 21442
The converter is based on the CH343 chip . It enables communication between USB and UART interfaces. It is used to exchange data between a computer and a microcontroller. It...SN65HVD230 CAN Board - Waveshare 3945
The module is based on the SN65HVD230 system that allows you to connect the microcontroller to the CAN bus. Communication is via the serial interface - RX, TX. It works with a...RS232/RS485 converter - Ethernet - Cortex M4 - Waveshare 16530
A device allowing communication between RS232 or RS485 and Ethernet RJ45 interfaces. Module configurable via web page, AT commands, serial protocol and network protocol. It...RS232 Hat for Raspberry Pi 3B/2B/B+
Shield for Raspberry Pi, version 3 and 2, with the system allowing for communication via the RS232 interface. The module has a ST3232 converter which communicates via UART and...- Reduced price
- Promotion
Converter USB-UART CP2102 - microUSB port - Waveshare 11325
Converter enables the communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The...2-Channel RS485 - 2-channel UART-RS485 SP3485 module - for Raspberry Pi Pico - Waveshare 19717
A module manufactured by Waveshare as a 2 channel UART - RS485 communication converter . Dedicated for use with Raspberry Pi Pico, it has pinouts compatible with...See also
Types of USB-UART converters
The converters come in different variants, differing not only in construction but also in operation. Special converters connected via USB are commonly used, but there are also converters in use that allow you to switch between UART and RS485 and RS232, or in other similar variants. USB-UART converters are based on many different modules. Check our offer, in which many variants of USB-UART converters are available.
The modules in the converters are detected as a COM port in the operating systems. We can connect them to the computer using special adapters. An example is a driver with an RS232 port, which we plug into a standard USB port. These are ready to use complete sets containing all the necessary elements together with the drivers. These types of devices are characterized by high stability of work and are adapted to intensive use. Please also note the overlays dedicated to it minicomputers, having built-in USB ports and USB-UART converters. Some models additionally have special diodes, which send to the user information about communication status and ports. In Botland you will already find ready-made sets with all the necessary mounting elements and necessary for immediate use of the device. We recommend, among others, UART converters, which have mini-USB and micro-USB ports, very well suited for Arduino. If you are interested in a very high data transfer rate, pay attention to the converters, which use two 26-pin connectors.
We focus on both simple and advanced solutions, so we have UART to RS485 converters, allowing to manage dozens of devices. In addition, we have converters that allow the exchange of information between RS485 and RS232 and Ethernet RJ45 interfaces. One of the characteristic features of this solution is the possibility of configuration via serial or network protocol, as well as via a website. With their use we can work in different modes, making them very versatile converters. Together with a modern converter you also receive Modbus support, which applies to industrial applications.
Performance and durability of USB-UART converters
The UART communication is distinguished by very high precision and reliability. This is especially true for modern devices, which are manufactured on the basis of innovative technologies. Choosing a USB-UART converter from a reputable manufacturer, you can count on long life and very high quality, which translates into high resistance to any failures and operating problems. Modern converters are designed for intensive use and high load, so they can be successfully used in very advanced projects. Botland store offers a wide range of USB-UART converters, which differ in technical parameters as well as additional functionalities. The converters differ in interface, layout and sockets. You will find here both simple devices, as well as more complex and more advanced projects.
Feel free to check out our proposals. Our experts are at your disposal if necessary. They will help you choose the best converter and accessories, and will give you valuable tips on its use and installation. All available products come from trusted, reputable manufacturers.