Measuring is one of the most important activities during prototyping, service, repair or overhaul work. For all work to be carried out precisely, we need precise data on width, length, weight, pressure or current, depending on the project and the elements and tools we work with. Measuring devices which should be included in the workshop equipment are selected taking into account the specifics of the work performed. The choice includes meters, thermometers, barometers, fractional generators and electric multimeters. Each of these devices has a different purpose and is used to measure a different unit. The measuring devices have found their application in professional workshops, but also in small studios and at home, in everyday use. They are indispensable in creating electronic projects and working with electronic devices. It is important that all measurements are reliable and accurate, so in Botland you will find only good quality devices.
- Reduced price
- Promotion
Raspberry Pi Pico HAT Expansion - shield for Raspberry Pi Pico
Index: SBC-18868
- Reduced price
- Promotion
Royal Resin Crystal epoxy resin dye - pearl liquid - 15 ml - purple
Index: ROY-18844
- Reduced price
- Promotion
- Reduced price
- Promotion
Raspberry Pi 400 GPIO adapter - 2x 40-pin - Waveshare 20219
Index: WSR-20079
- Reduced price
- Promotion
Measuring instruments & devices
Loading...
Universal multimeter Rebel RB-830
Universal meter for basic electrical and electronic measurements. Using the multimeter, it is possible to measure DC current up to 10 A , DC voltage up to 1000 V or AC...
Index: LEC-18397
Index: LEC-18397
Cables, measuring probes for multimeters - 3-piece crocodile clips
Three cables for the gauges ended on the one side with the banana plugs, on the other, with the connectors of the crocodile type. Cable length is 85 cm (without plugs and...
Index: UPM-02668
Index: UPM-02668
Cables, measuring probes for multimeters - universal angular 85cm
The cables are terminated on one side with angled banana plugs with shielded ends of 4 mm diameter, on the other side with 110 mm long measurement probes. Cable length is 85 cm...
Index: UPM-05387
Index: UPM-05387
Benetech GM3120 electromagnetic field meter
The instrument allows the measurement of electrical radiation in the range from 1 V/m to 1999 V/m and magnetic emission in the range from 0.01 μT to 19.99 μT and bandwidth...
Index: BNT-10763
Index: BNT-10763
USB multimeter KWS-V21 Charger Detector
Small size USB meter designed for testing USB 2.0 sockets . Very easy to use. It is equipped with a clear LCD screen, which displays voltage, current, capacity and...
Index: DNG-17513
Index: DNG-17513
Temperature Meter Pyrometer Benetech GM320 from -50 to 380C
IR contactless pyrometer thermometer. It has a laser pointer for accurate targetting the measured point. The device is equipped with a graphical backlit display and has an auto...
Index: BNT-10767
Index: BNT-10767
USB tester Keweisi KWS-1802C current and voltage meter from USB C port - black
A USB meter designed for testing USB type C sockets . It is equipped with a clear LCD screen, which displays voltage, current, capacity, operating time, internal temperature...
Index: DNG-17511
Index: DNG-17511
USB sockets tester UNI-T UT658 Dual
The UNI-T UT658 Dual USB socket tester allows you to test USB chargers , portable power supplies, USB type A and C cables and other charging devices. UT658 allows you to...
Index: LEC-17180
Index: LEC-17180
The device measures current and voltage from the USB slot of the computer or power supply/ charger. It has a male plug, type A and two female sockets for connecting to any...
Index: ZAS-04112
Index: ZAS-04112
Charger Doctor - current and voltage meter USB
The device measures current and voltage from the USB slot of the computer or power supply / charger. It has a male plug type A and female socket to connect any device -...
Index: ZAS-04087
Index: ZAS-04087
YT-7220 feeler gauge for leveling the hotbed in a 3D printer
Tool designed to measure small gaps . Thanks to precisely made 17 leaves of different thickness , it allows you to easily measure the distance between two planes. The...
Index: TOY-21568
Index: TOY-21568
Caliper Vorel 15120 150mm - plastic
Caliper made of plastic by Vorel with a measuring range from 0 to 150 mm and accuracy +/- 0,05 mm. Packed in a plastic case.
Index: TOY-12937
Index: TOY-12937
Battery charge level and sound level indicator - KA2284
The module is based on the KA2284 system. It is used to measure the input signal with the 5 LEDs, which are gradually included depending on the value of the measured voltage....
Index: MOD-07150
Index: MOD-07150
Tester equipped with a large, clear 1.8" TFT display. It can be used to test various types of transistors and diodes, resistors, capacitors, inductors and batteries. In...
Index: DNG-18505
Index: DNG-18505
Temperature Meter Pyrometer Benetech GM550 from -50 to 550C
IR contactless pyrometer thermometer. It has a laser pointer for accurate targetting the measured point. The device is equipped with a graphical backlit display and has an...
Index: BNT-10768
Index: BNT-10768
Analog ammeter - panel 91C16 mini - 20A
Analog ammeter capable of measuring current in the range up to 20 A. It has a square case in size 40 x 40 mm. The accuracy CLASS 1.5.
Index: PRO-10210
Index: PRO-10210
Anemometer / anemometer Benetech GM816 - 6-arm rotor
Anemometer / wind gauge is used to measure the movement of gases, the flow rate of air. The device has a 6-arm rotor, which, due to gas flow, begins to rotate. Measurements are...
Index: BNT-10764
Index: BNT-10764
Universal multimeter UNI-T UT33D+
The UNI-T multimeter allows to define DC and AC parameters and to perform NCV ( electric field detection ) measurements . Obtained results are presented on a backlit...
Index: LEC-17717
Index: LEC-17717
Tachometr kontatkowy - Benetech GM8906
A tachometer is a device used to measure the rate of linear speed rotation and frequency of electric motors, rotors, blades, shafts, etc.
Index: BNT-19575
Index: BNT-19575
DFRobot Gravity - I2C battery charge level meter
A module designed for reading the Li-Pol 3.7 V battery charge level in real-time. It is also equipped with alarm function when the battery level is low, or when battery power...
Index: DFR-12263
Index: DFR-12263
Measuring tape Yato Yato YT-7105 - 5m
Universal roll-up measure with a length of 5 m. The casing is made of ABS plastic, additionally for the convenience of users it has anti-slip black rubber. The tape is white in...
Index: TOY-15143
Index: TOY-15143
Functional generator DDS JDS6600 15MHz - 2 channels
Dual channel function generator with waveform generation up to 15 MHz, 200 MSa/s with 12 bit vertical resolution, 17 standard waveforms and 60 built-in 2048 point arbitrary...
Index: GTK-11405
Index: GTK-11405
USB tester Keweisi KWS-1802C current and voltage meter from USB C port - white
USB meter in white, designed for testing USB type C sockets . It is equipped with a small but clear LCD screen , which displays voltage, current, capacity, operating time,...
Index: DNG-17512
Index: DNG-17512
The device allows to measure the rotational speed in the range of 2.5 to 99,999 rpm resolution 0.1 rpm Meter can be used, for example, to study the speed of engines.
Index: BNT-12312
Index: BNT-12312
See also
Measuring devices for the workshop, workshop and home
Measuring physical values is one of the most frequently performed activities when doing DIY, creating electronic projects or working with electrical devices. To make the measurements accurate and reliable, appropriate tools are needed - sensors, meters and other measuring instruments.
Electric meters and multimeters
In the measuring devices category you will find a large selection of analog and digital meters for electrical quantities. Tools available include measuring DC and AC voltage, current, resistance and electrical capacity, as well as oscilloscopes, function generators and electricity consumption meters. In this section you will also find battery charge level meters and socket and network cable testers. We also offer a wide selection of electrical multimeters that allow you to measure many parameters with one device. Universal multimeters are made of light and at the same time durable plastic. It is characterized by versatile use (both inside and outside buildings), high accuracy and repeatability of measurements.
Other measuring devices
Our assortment includes a wide range of devices for measuring weather parameters: air purity sensors (detecting dust, smoke or the presence of substances such as carbon monoxide, alcohol, gasoline, ammonia or formaldehyde), thermometers, barometers, hygrometers and anemometers.
We offer devices for the analysis of radio waves, thermal cameras, sonometers, tachometers and metal detectors, as well as a wide selection of scales, measuring cups and calipers (including spirit levels and rangefinders). Our assortment also includes lux meters, i.e. devices designed to measure light intensity. On the Botland website you will also find a wide selection of meter probes, cables, connectors and adapters used in measuring devices.
What should you pay attention to when choosing measuring devices?
Regardless of the type of measuring device and the physical quantity it measures, all tools of this type have a specific degree of accuracy and a specific measurement range.
Matching them to the planned use is very important for subsequent comfort of use - for example, a jewelry scale will be completely useless in the kitchen, while a high-voltage cable meter will not work for precise electronic projects.
Measuring tools - what else is worth knowing before choosing?
Moreover, many measuring devices are available in both analog and digital versions, and both variants have their advantages and disadvantages. Analog meters are usually more accurate (although there is a higher probability of incorrect data reading) and do not require additional power supply.
However, digital devices are often lighter and easier to transport, and the read value leaves no doubt. However, they need power, and the result is always more or less rounded.
Measuring devices
Measuring devices are an extremely broad group of products, including both electrical measurement devices (e.g. multimeters, oscilloscopes , functional and arbitrary generators, wattmeters, energy meters and battery testers) as well as various temperature, humidity, pressure and flow rate meters. media, distance, etc.
The category of measuring tools includes primarily devices used to measure thickness, length and depth ( calipers and micrometers), although in precision mechanics special protractors are also used. In the construction and renovation industry, for example, they are constantly used: popular laser rangefinders.