Description: Filament Fiberlogy Easy PLA 1.75 mm 2.5 kg - White
Filament EasyPLAinwhitecolour, designed for3D printers, operating inFFF / FDMtechnology. The product weighs2.5 kgand is wound on a spool. It has been vacuum packed together with a moisture absorber. Recommended printing temperature is between 200°C and 230°C. The diameter of the filament is1.75 mm. The Easy PLA filter can be used e.g. for printing various elements of toys, jewellery, decorations, etc. The material is made of renewable raw materials, which makes it biodegradable.
In our offer of filaments you will also find other materials and colors.
Properties of the file
- Very good merging of layers during 3D printouts
- The material is biodegradable
- Waterproof
- Does not emit an intense odour during printing
- Table heating is not required
- It is characterized by high warpage resistance and high strength
Suggested print parameters for filament
Printing temperature | From 200°C to 230°C |
Table temperature | From 50°C to 70°C |
Cooling the printout | Recommended |
Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the filament
Parameter | Scope |
---|---|
Diameter of pillar | 1.75 mm |
Dimensional tolerances of the philanthropy | +/- 0,02 mm |
Colour | White |
Printing temperature | From 200°C to 230°C |
Table temperature | From 50°C to 70°C |
Material | Easy PLA |
Reel diameter | 300 mm |
Reel width | 93 mm |
Mounting hole diameter | 54 mm |
Moisture absorber | Yes |
Vacuum packing | Yes |
Roundness | +/- 0.01 mm |
Net weight | 2.5 kg |