Filament Devil Design PLA 1,75mm 1kg - Emerald Green

Index: DEV-16061 EAN: 5902280032038

The PLA filter in emerald / green colour, has a diameter of 1.75mm and is characterized by high strength, water resistance. Presented product is a thermoplastic polyester wrapped on a spool. Net weight is 1 kg. Due to the ease of printing, the PLA pillars are used, among others, by novice users of 3D printers.

Filament Devil Design PLA 1,75mm 1kg - Emerald Green
€22.50
€18.29 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Devil Design

Product description: Filament Devil Design PLA 1,75 mm 1 kg - Emerald Green

The PLA filter inemerald / greencolour, has a diameter of 1.75mm,is characterized by high strength, water resistance and resistance to warping of the material. Presented product is a thermoplastic polyester wrapped on a spool. Net weight is 1 kg. Due to the ease of printing, the PLA pillars are used, among others, by novice users of FFF3Dprinters, printing pens and open source devices. PLA pillars produced by Devil Design are made from natural raw materials, thanks to which they undergo the process of decomposition. The manufacturer recommends cooling the printout.

Filaments

In our offer of filaments you will also find other materials and colors.

Filament Devil Design PLA 1,75mm 1kg - Emerald Green

Filament Devil Design PLA 1.75 mm 1 kg - emerald green.

Advantages ofPLAfilaments

The suggested temperature of the printer head is between 200°Cand 235°C, andof the table between 50°C and 60°C.The right temperature has to be determined experimentally, because each printer is different. Devil Design's PLA filters are compatible with printers that do not have a blockage preventing the use of external suppliers' materials. During printing, the described product emits a low intensity odour, which ensures comfortable work. PLA material is not flammable and has a very low material shrinkage.

Suggested print parameters for filament

Printing temperature From 200°C to 235°C
Table temperature From 50°C to 60°C
Cooling the printout Recommended

Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally.

Technical specifications and physical properties of the Devil Design pillar

Parameter Scope
Diameter of pillar 1.75 mm
Dimensional tolerances of the philanthropy +/- 0.05 mm
Colour Emerald green
Printing temperature From 200°C to 235°C
Table temperature From 50°C to 60°C
Spool - material PLA
Reel diameter 200 mm
Reel width 70 mm
Mounting hole diameter 52 mm
Package Printed carton
Moisture absorber Yes
Vacuum packing Yes
Roundness +/- 0,02 mm
Packaging dimensions 205 x 205 x 80 mm
Net weight 1 kg

Colour emerald
Mass 1000 g
Filament - material PLA
Filament - diameter 1.75 mm
Package width 20.3 cm
Package height 20.5 cm
Package depth 7.8 cm
Package weight 1.36 kg

Be the first to ask a question about this product!

Product reviews

Filament Devil Design PLA 1,75mm 1kg - Emerald Green

5/5

Average grade

2

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: