Description: Devil Design PLA Filament 1,75 mm 1 kg - Yellow
Filament for 3D printers, PLA in yellow with a diameter of 1,75 mm, comes in the form of filament wound on a spool. The whole is safely vacuum packed with moisture absorber. Filaments from the manufacturer Devil Design are designed for all 3D printers not protected from the use of third-party cartridges and for open source devices. Suggested parameters of the printout with the use of the described felt are: head temperature between 200 ° C and 235 ° C and table temperature from 50 ° C to 60 ° C. Manufacturer recommends cooling the printout.
In our offer of filaments you will also find other materials and colors.
Properties of PLA filament
PLAFilament is a thermoplastic polyester made mainly from renewable resources, so it's biodegradable. PLA is characterised by very low shrinkage and increased resistance to UV rays. Due to its minimal water absorption, it is used for food packaging, surgical threads and even implants. The described filament is characterized by a barely perceptible smell. Moreover, it is not flammable, which significantly increases the safety of work. PLA is fully waterproof and has a high resistance to warping. PLA felt because of its properties and ease of use is intended for 3D printer beginners, among others.
Suggested parameters for printing with PLA felt
Printing temperature | From 200°C to 235°C |
Table temperature | From 50°C to 60°C |
Print cooling | Recommended |
Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of Devil Design felt
Parameter | Range |
---|---|
Filament diameter | 1,75 mm |
Dimensional tolerance of the felt | +/- 0.05 mm |
Colour | Yellow |
Printing temperature | From 200°C to 235°C |
Table temperature | From 50°C to 60°C |
Spool material | PLA |
Melting point of material | Approximately 50°C |
Material shrinkage | Very low |
Packaging | Carton |
Moisture absorber | Yes |
Density | 1.24 g/cm3 |
Roundness | +/- 0,02 mm |
Net weight | 1 kg |
Useful links |