Description: Devil Design PLA Filament 1,75 mm 1 kg - Race Green
Filament for 3D printers - PLA filament in Race Green colour with weight 1 kg and diameter 1,75 mm. The whole is safely vacuum packed with moisture absorber. Filaments produced by Devil Design are designed for all 3D printers that are not protected against the use of third-party cartridges and for open source devices.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PLA 1,75 mm 1 kg - Race Green.
Properties of PLA filament
- Biodegradable due to production from renewable raw materials
- Low material shrinkage for accurate prints
- Resistant to UV radiation
- Resistant to warping for easy printing
- Safe to use due to non-flammability
- Easy to use, ideal for novice users
Suggested parameters for printing with PLA felt
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Print cooling | Recommended |
| Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of Devil Design felt
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the felt | +/- 0.05 mm |
| Colour | Race Green |
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Spool - material | PLA |
| Melting point of material | Approximately 50°C |
| Material shrinkage | Very low |
| Packaging | Carton |
| Moisture absorber | Yes |
| Density | 1.24 g/cm3 |
| Roundness | +/- 0,02 mm |
| Net weight | 1 kg |
Useful links |
