Product description: Filament Devil Design PLA 1.75 mm
Copper-colouredfilteramentby DevilDesign. The material of the filament is thermoplastic polyester in fibre form (PLA). The diameter of the filter is 1.75mm, andthe optimum printing temperature is between 200°C and 235°C.It can be used for 3D printing in all FFFprinters. PLA is abiodegradablematerial. It is made from renewable natural resources. It is characterised by its trouble-free and easy use.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PLA 1.75 mm 1 kg - Cooper.
Properties of the PLA pillar
- High durability
- Ease of printing
- Watertightness
- Warp-resistance of material
- Biodegradability
- It is available in many colour variants
- It is not flammable
Specification of the PLA pillar
| Parameter | Scope |
|---|---|
| The colour of the pillar | Copper |
| Type of philanthropy | PLA |
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0.05 mm |
| Roughness of the philanthropy | +/- 0,02 mm |
| Material surface | Gloss |
| Material contraction | Very low |
| Spool - material | Transparent polycarbonate |
| Weight of empty spool | About 250 g |
| Reel diameter | 200 mm |
| Reel width | About 70 mm |
| Mounting hole diameter | 52 mm |
| Product weight | 1.0 kg net |
Suggested print parameters for filament
| Head temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Useful links |
