Product description: Filament Devil Design PLA 1.75 mm
A gold-coloured filmby DevilDesign. The material of the filament is thermoplastic polyester in fibre form (PLA). The diameter of the filament is 1.75mmand the printing temperature is optimal between 200°C and235°C.It can be used for 3D printing in all FFFprinters. PLA is a biodegradable material.It is made from renewable natural resources and is easy to use.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PLA 1.75 mm 1 kg - Gold.
Properties of the PLA pillar
- High durability
- Ease of printing
- Watertightness
- Warp-resistance of material
- Biodegradability
- It is available in many colour variants
- It is not flammable
| Due to the design differences of the printers, the following data should be taken as a guide and the corresponding values should be determined experimentally. |
PLA pillar specification
| Parameter | Scope |
|---|---|
| The colour of the pillar | Gold |
| Type of philanthropy | PLA |
| Printing temperature | From 200°C to 235°C |
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0.05 mm |
| Roughness of the philanthropy | +/- 0,02 mm |
| Material surface | Gloss |
| Material contraction | Very low |
| Spool - material | Transparent polycarbonate |
| Weight of empty spool | About 250 g |
| Reel diameter | 200 mm |
| Reel width | About 70 mm |
| Mounting hole diameter | 52 mm |
| Product weight | 1.0 kg net |
Useful links |
