Product description: Devil Design PLA 1,75 mm 1 kg - Galaxy Violet
PLAthermoplastic polyester filament used for FFF 3D printing and printing pens. Filament wound on a spool, vacuum packed with moisture absorber.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PLA 1,75 mm 1 kg - Galaxy Violet.
Spool contains 1 kg of the felt net. Can be used in all FFF printers unprotected against the use of filaments from an external supplier and open source designs. PLA is a biodegradable material, made from renewable natural resources. It is primarily dedicated to amateurs due to its trouble-free use.
Properties of PLA filament
- Easy to print at low temperatures
- Resistance to material warping
- Biodegradability
- Low odour intensity
- Inexpensive and comes in many colour variations
- It is not flammable
- High strength
- Totally waterproof
Suggested parameters for printing with the filament
| Head temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Print cooling | Recommended |
| Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of Devil Design PLA filament
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the felt | +/- 0.05 mm |
| Roundness of the filament | +/- 0,02 mm |
| Material surface | Gloss |
| Material shrinkage | Very low |
| Product weight | 1.0 kg net, 1.36 kg gross |
| Material | PLA |
| Weight of empty spool | ~ 250 g |
| Spool diameter | 200 mm |
| Spool width | ~ 70 mm |
| Mounting hole diameter | 52 mm |
| Packaging | Printed carton |
| Package dimensions | ~ 205 x 205 x 80 mm |
| Vacuum packaging | Yes |
| Moisture absorber | Yes |
Devil Design PLA Filament 1,75 mm 1 kg - Galaxy Violet
PLA Filaments are fully biodegradable. To produce them, natural ingredients such as sugar cane or corn are used. Another advantage of this material is the small amount of unpleasant smell, which is emitted during printing.
Filaments by Devil Design PLA with diameter of 1,75 mm and weight of 1 kg in Galaxy Violet colour are perfect for prototyping. They are used both by beginners and experienced 3D printing enthusiasts.
What else you should know about Devil Design PLA Films 1,75 mm diameter and 1 kg weight?
The density of this filament is 1.24 g/cm³. On the other hand, the temperature at which it starts to soften is about 50℃. Other advantages include very low shrinkage and very little water absorption.
The presented filament is characterized by wide compatibility and trouble-free use.
Useful links |
