Product description: Filament Devil Design PLA 1.75mm 1kg - Bright Yellow
Bright yellow 3D printer cartridge with a diameter of 1.75 mm. PLA filament comes as w filament on spools. The whole thing was safely vacuum-packed and equipped with a moisture absorber. Devil Design filaments are intended for all 3D printers not protected against the use of a third-party cartridge and for "open source" devices. The suggested printing parameters using the described filament are: head temperature between 200 ° C and 235 ° C and bed temperature between 50 ° C and 60 ° C. For the correct printing process, the manufacturer recommends cooling the printout.
Filament Devil Design PLA 1.75mm 1kg - Bright Yellow.
Features of the PLA filament
- The filament is biodegradable, which makes it friendlier to nature.
- The material is easy to print at low temperatures.
- The fiber gives off a low-intensity smell.
- The filament is not flammable.
- The fiber offers high strength.
- The material is fully waterproof
Suggested filament printing parameters
| Printing temperature | From 200 ° C to 235 ° C |
| Table temperature | 50 ° C to 60 ° C |
| Cooling the print | Recommended |
| Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Bright yellow |
| Printing temperature | From 200 ° C to 235 ° C |
| Table temperature | 50 ° C to 60 ° C |
| Cooling the print | Recommended |
| Spool - material | PLA |
| Spool outer diameter | 200 mm |
| Spool width | ~ 70 mm |
| Mounting hole diameter | 52 mm |
| Package | Cardboard with print |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Spool dimensions | 200 x ~ 70 x 52 mm |
| Net weight | 1 kg |
Useful links |
