Description: Devil Design PLA 1,75 mm 1 kg - Navy Blue
PLA Filament is a thermoplastic polyester filament used for FFF 3D printing and printing pens. Filament wound on a spool, vacuum packed with moisture absorber.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PLA 1,75 mm 1 kg - Navy Blue.
Spool contains 1 kg of the felt net. Can be used in all FFF printers unprotected against the use of filaments from an external supplier and open source designs. PLA is a biodegradable material, made from renewable natural resources. It is primarily dedicated to amateurs due to its trouble-free use.
Properties of PLA filament
- Easy to print at low temperatures
- Resistance to material warping
- Biodegradability
- Low odour intensity
- Inexpensive and comes in many colour variations
- It is not flammable
- High strength
- Totally waterproof
Suggested parameters for printing with the filament
| Head temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Print cooling | Recommended |
| Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of Devil Design PLA filament
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the felt | +/- 0.05 mm |
| Roundness of the filament | +/- 0,02 mm |
| Material surface | Gloss |
| Material shrinkage | Very low |
| Product weight | 1.0 kg net, 1.36 kg gross |
| Material | PLA |
| Weight of empty spool | ~250 g |
| Spool diameter | 200 mm |
| Spool width | ~70 mm |
| Mounting hole diameter | 52 mm |
| Packaging | Printed carton |
| Package dimensions | ~205 x 205 x 80 mm |
| Vacuum packaging | Yes |
| Moisture absorber | Yes |
Filament Devil Design PLA 1,75mm 1kg - Navy Blue
Presented felt is characterized by low shrinkage and density at 1.24 g/cm³. The temperature at which the material begins to soften is about 50℃. The maximum stretch at break is 160%.
Devil Design PLA filaments with a diameter of 1.75 mm and weight of 1 kg in navy blue are resistant to UV radiation, and at the same time are characterized by virtually zero water absorption. It's this versatility and wide range of applications that make PLA material so popular.
Additional features of Devil Design PLA 1,75 mm 1 kg felt
During the thermal processing, the described filament emits a small amount of odour. Moreover, relatively low head and table temperature makes the printing process much easier.
PLA material can be successfully used to print toys, figurines, jewelry, housings, as well as other elements with varying levels of complexity and detail.
Useful links |
