Description: Filament Devil Design PLA 1,75 mm 1 kg - Pink Pearl
Pink Pearl filament by Devil Design. The material is thermoplastic polyester in fibre form(PLA). The diameter of the pillar is1.75 mmand the printing temperature is optimal between 190°C and 205°C. It can be used for 3D printing in all FFF printers. PLA is a biodegradable material. It is made from renewable natural resources. It is characterised by its trouble-free and easy use.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PLA 1,75 mm 1 kg - Pink Pearl.
Pink Pearl contains1 kg of the filament. It can be used in all FFF printers that are not protected against the use of filaments from external suppliers and open source designs. PLA is abiodegradable material, made from renewable raw materials. It is primarily dedicated to amateurs due to its trouble-free use.
Properties of the PLA
- Easy to print at low temperatures
- Warp-resistance of material
- Biodegradability
- Low odour
- Cheap and comes in many different colors
- It is not flammable
- High durability
- Total watertightness
Suggested print parameters for filament
Head temperature | From 190°C to 205°C |
Table temperature | 60°C to 70°C |
Cooling the printout | Recommended |
Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the Devil Design PLA filament
Parameter | Scope |
---|---|
Diameter of pillar | 1.75 mm |
Dimensional tolerances of the philanthropy | +/- 0,05 mm |
Roughness of the philanthropy | +/- 0,02 mm |
Material surface | Gloss |
Material contraction | Very low |
Material | PLA |
Weight of empty spool | ~250 g |
Reel diameter | 200 mm |
Reel width | ~70 mm |
Mounting hole diameter | 52 mm |
Package | Printed carton |
Packaging dimensions | ~205 x 205 x 80 mm |
Vacuum packing | Yes |
Moisture absorber | Yes |
Product weight | 1,0 kg net, 1,36 kg gross |
Useful links |