Product description: Filament Devil Design PLA 1,75 mm 2 kg - Gray
Thermoplastic polyester wound on a spool with a diameter of 310 mm, net weight of2 kgand thickness of1,75 mm.PLAgreyfilament,characterized by low material shrinkage. It is designed for3D printers. Moreover, it is characterized by increased resistance to UV rays and mechanical damage. Due to its properties, it is used, among others, for the production of packaging for food storage and medical accessories.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PLA 1,75 mm 2 kg - grey.
Other features of the PLA pillar
The material is fully waterproof andbiodegradable. In addition, it gives off a low odour during operation and is resistant to warping. What's more, PLA pillars are not flammable. The suggested temperature of the printer head is between 200°C and 235°C, and of the table between 50°C and 60°C. The manufacturer recommends cooling the printout. Devil Design's filters are compatible with 3D printers, which do not have built-in protection against material produced by an external supplier.
Suggested print parameters for filament
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the Devil Design pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0.05 mm |
| Colour | Grey |
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Spool - material | PLA |
| Reel diameter | 310 mm |
| Reel width | 100 mm |
| Mounting hole diameter | 50 mm |
| Package | Carton |
| Moisture absorber | Yes |
| Vacuum packing | No |
| Roundness | +/- 0,02 mm |
| Packaging dimensions | 310 x 310 x 110 mm |
| Net weight | 2 kg |
Useful links |
