Description: Sunlu PLA+ Silk 1,75 mm 1 kg - Rainbow
Rainbow-coloredPLA+ Sil k Filament, made from materials consisting mainly of corn starch. Thanks to that the felt is fully biodegradable and environmentally friendly. Filament diameter is 1,75 mm. It is designed for 3D printers working in FDM technology. Surface of the material after printing has a high gloss. Net weight of filament is 1 kg. Product is vacuum packed with moisture absorber. Protect the material from sunlight and moisture.
Spools are sent randomly in "Rainbow 0.1" or "Rainbow 0.2" color.
Properties of Sunlu PLA filament
- 3D prints with high gloss
- Does not emit any odour during printing
- Biodegradable material, consists of corn starch
- The filament is toughened, resistant to tearing
- The material is characterized by low shrinkage
- The finished printout is smooth and delicate to the touch
Suggested parameters for printing with the filament
Head temperature | From 200°C to 230°C |
Table temperature | From 60°C to 80°C |
Print cooling | Recommended |
Due to differences in printers design, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of PLA+ Silk Sunlu felt
Parameter | Range |
---|---|
Felt diameter | 1,75 mm |
Designed for 3D printing in | FDM |
Printing speed | from 50 to 100 mm/s |
Color | Rainbow |
Tensile strength | 11 to 15 kgf |
Tolerance | ≥ 0.2 mm |
Spool material | PLA+ Silk |
Spool diameter | 195 mm |
Spool width | 59 mm |
Mounting hole diameter | 72 mm |
Vacuum packaging | Yes |
Moisture absorber | Yes |
Filament length | 330 m |
Net product weight | 1,0 kg |
Sunlu PLA+ Silk 1,75 mm 1 kg - Rainbow
Presented filament by Sunlu is fully compatible with all printers without built-in security lock against the use of third-party thermoplastic materials.
PLA+Silk felts are characterized by melting point ranging from 165℃ to 180℃. The relatively high melt flow rate of 11g to 16g/10 min allows for high print speeds without the risk of losing model detail.
What else is worth knowing about Sunlu PLA+ Silk filament?
3D printing with PLA+Silk thermoplastic material should not cause any problems even for beginners of 3D printers.
The manufacturer describes the tensile strength as being in the range of 7 to 11 KGF. The rainbow color allows you to print original decorative elements, characterized by resistance to damage and durability.
Useful links |