Description: Devil Design PLA Filament 1,75 mm 5 kg - White
Filament for3D printers,PLAinwhitewith a diameter of1,75 mm, comes in the form of filament wound on a spool. The whole is safely vacuum packed with moisture absorber. Devil Design filaments are suitable for all non-secure 3D printers and open source devices. Suggested parameters of the printout with the use of the described felt are: head temperature between200 ° C and 235° C and table temperature from50 ° C to 60° C. Manufacturer recommends cooling the printout.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PLA 1,75 mm 5 kg - white.
Properties ofPLAfilament
- Biodegradable due to production from renewable raw materials
- Low material shrinkage for accurate prints
- Resistant to UV radiation
- Resistant to warping for easy printing
- Safe to use due to non-flammability
- Easy to use, ideal for novice users
Suggested parameters for printing with PLA felt
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Print cooling | Recommended |
| Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of Devil Design felt
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the felt | +/- 0.05 mm |
| Colour | White |
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Spool material | PLA |
| Melting point of material | Approximately 50°C |
| Material shrinkage | Very low |
| Packaging | Carton |
| Moisture absorber | Yes |
| Density | 1.24 g/cm3 |
| Roundness | +/- 0,02 mm |
| Net weight | 5 kg |
Devil Design PLA Filament 1,75 mm 5 kg - White
PLA plastic by Devil Design is characterized by a density of 1.24 g/cm³. Maximum stretch at break is 160%. The softening temperature of this PLA material is about 50°C.
Devil Design PLA filament with a diameter of 1.75 mm and weight of 5 kg in white is ideal for prototyping, due to its easy use and relatively low price. In addition, it is used to print biodegradable jewelry, figurines, ornaments, as well as everyday items.
Useful links |
