Description: Devil Design PLA Filament 1,75 mm 2 kg - Black
Filament for3D printers,PLAinblackwith a diameter of1,75 mm, comes in the form of filament wound on a spool. The whole is safely vacuum packed with moisture absorber. Devil Design filaments are suitable for all non-secure 3D printers and open source devices. Suggested parameters of the printout with the use of the described felt are: head temperature between200 ° C and 235° C and table temperature from50 ° C to 60° C. Manufacturer recommends cooling the printout. Product with a net weight of 2 kg.
In our offer of filaments you will also find other materials and colors.
Devil Design PLA 1,75 mm 2 kg - black.
Properties ofPLAfilament
PLA filament is a thermoplastic polyester produced from renewable resources, which makes itbiodegradable. PLA is characterised by very low shrinkage and increasedresistancetoUV rays. Due to the minimal water absorption, it is used for food packaging, surgical threads and even implants. The described filament is characterized by a barely perceptible smell. Moreover, it is not flammable, which significantly increases the safety of work. PLA is fullywaterproofand characterized by high resistance to warping and durability. PLA felt because of its properties and ease of use is intended for 3D printer beginners, among others.
Suggested parameters for printing with PLA felt
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Print cooling | Recommended |
| Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of Devil Design felt
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the felt | +/- 0.05 mm |
| Colour | Black |
| Printing temperature | From 200°C to 235°C |
| Table temperature | From 50°C to 60°C |
| Spool material | PLA |
| Melting point of material | Approximately 50°C |
| Material shrinkage | Very low |
| Packaging | Carton |
| Moisture absorber | Yes |
| Density | 1.24 g/cm3 |
| Roundness | +/- 0,02 mm |
| Net weight | 2 kg |
Devil Design PLA Filament 1,75 mm 2 kg - Black
PLA plastic by Devil Design is characterized by a density of 1.24 g/cm³. Maximum stretch at break is 160%. The softening temperature of this PLA material is about 50 ° C.
Devil Design PLA felt with a diameter of 1.75 mm and weight of 2 kg in black is ideal for prototyping, due to its easy use and relatively low price. In addition, it is used to print biodegradable jewelry, figurines, ornaments, as well as everyday items.
Useful links |
