Description: Filament Fiberlogy Easy PLA 1,75 mm 2,5 kg - Gray
The EasyPLAgrey filament is designed for3D printers. The product is wound on a 300 mm diameter spool and has a net weight of2.5 kg. It has been vacuum packed together with a moisture absorber. Recommended printing temperature is between 200°C and 230°C. The diameter of the filament is1.75 mm. The Easy PLA pillar can be used e.g. for printing various types of prototypes, toys, individual elements of toys, jewellery, decorations, etc. The material is made of renewable raw materials, which makes it biodegradable.
Filament Fiberlogy Easy PLA 1.75 mm 2.5 kg - Gray.
In our offer of filaments you will also find other materials and colors.
Properties of the filament
- Very good merging of layers during 3D printouts
- Biodegradable material
- Waterproof
- Low odour when printing in 3D
- Table heating is not required
- It is characterized by high warpage resistance and high strength
Suggested print parameters for filament
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Cooling the printout | Recommended |
|
Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the filament
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Grey |
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Material | Easy PLA |
| Reel diameter | 300 mm |
| Reel width | 93 mm |
| Mounting hole diameter | 54 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Net weight | 2.5 kg |
