Product description: Filament Fiberlogy R PLA 1.75 mm 0.85 kg - Anthracite
Filament made of R PLA material (100% recycled) in anthracite color is environmentally friendly. It is designed for 3D printers working in FFF / FDM technology. The filament diameter is 1.75 mm and the material weight is 850 g . The product was packed under vacuum.
In our offer of filaments you will also find other materials and colors.
Fiberlogy R PLA Filament 1.75 mm 0.85 kg - Anthracite.
The R line from Fiberlogy
Fiberlogy R is a filament made entirely in the recycling process. The product combines high quality, optimization of production processes and minimizing the negative impact on the ecosystem.
Properties diagram of R PLA.
Suggested filament printing parameters
| Printing temperature | From 210 ° C to 230 ° C |
| Table temperature | 50 ° C to 70 ° C |
| Cooling the print | Recommended |
|
Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Fiberlogy R PLA filament specification
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.02 mm |
| Color | Anthracite |
| Printing temperature | From 210 ° C to 230 ° C |
| Table temperature | 50 ° C to 70 ° C |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Closed chamber | Not required |
| Airflow | from 75% to 100% |
| Print speed | <100 mm="" s="" td=""> |
| Subsoil | Glass, masking tape |
| Direct retraction | Yes, from 2mm to 3mm |
| Bowden Retraction | Yes, from 4mm to 6mm |
| Retraction speed | From 20 mm / sec to 45 mm / sec |
| Drying conditions | 50 ° C / 4 h |
| Suggested minimum nozzle diameter | 0.5 mm |
| Spool dimensions | 200 x 200 x 80 mm |
| Spool hole diameter | 54 mm |
| Net weight | 0.85 kg |
