Product description: Prusa PLA filament 1.75 mm 2 kg - Recycled NFC
Prusa filament is used for FDM/FFF 3D printers. The product is made of 100% recycled Prusament PLA. No other additives or pigments are added, so each batch is a different color. The filament has a diameter of 1.75 mm and a net weight of 2 kg . PLA is biodegradable and made from renewable natural resources. It is characterized by low temperature resistance and is intended for indoor use.
Prusa PLA Filament 1.75 mm 2 kg - Recycled NFC - each spool is a different color.
Features of Prusament PLA
- Made from biodegradable raw materials
- It has a low melting point
- It comes from recycling
- Each spool of material has a different color due to the production process
- Hard but brittle
- It has low temperature resistance
- Elements printed from PLA begin to lose mechanical strength at temperatures above 60°C
- It has low resistance to UV radiation, recommended for indoor use.
- It is recommended to connect print elements made using PLA material using glue.
- The maximum drying temperature for Prusament PLA is 50°C for a minimum of 4 hours.
Suggested filament printing parameters
| Head temperature | From 205°C to 225°C |
| Table temperature | From 40°C to 60°C |
| Print cooling | Recommended |
Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
Technical specifications and physical properties of Prusa filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.02 mm |
| Use | FDM / FFF 3D printing |
| Chemical name of the filament | Polylactic acid (Polylactide) |
| Material shrinkage | Short |
| Color | Each spool is different |
| Filament type | PLA Recycled |
| Spool diameter | 200 mm |
| Spool width | 125 mm |
| Mounting hole diameter | 52 mm |
| Net product weight | 2 kg |
