Description: Filament Fiberlogy Easy PLA 1,75 mm 0,85 kg - Orange
Fiberlogy's PLA filament inorangewith a diameter of1.75 mm, wound on reels of0.85 kgnet weight. Vacuum packed together with a moisture absorber. Fiberlogy Filaments are designed for all3Dprinters,working in FFF / FDM technology, unprotected against the use of cartridges from another supplier and for open source devices. For correct printing, the temperature should be from 200°C to 230°Cand the table temperature from 60°Cto 70°C. Easy PLA can be used e.g. for printing various types of prototypes, toys, jewellery, decorations, etc.
In our offer of filaments you will also find other materials and colors.
Filament Fiberlogy Easy PLA 1,75 mm 0,85 kg - Orange.
Properties of the Easy PLA file
Filament is produced mainly from renewable raw materials and is therefore biodegradable. Moreover, PLA is distinguished by a very low material shrinkage and increased UVresistance. The described film has a low odour and is not flammable, which increases work safety. PLA is fullywaterproofand has high warpage resistance and is durable. Due to its properties and ease of use,PLAis intended, among others, for beginner users of 3D printers. It is characterized by a very good combination of layers during 3D prints.
Suggested print parameters for filament
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Orange |
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Spool - material | Easy PLA |
| Reel diameter | 200 mm |
| Reel width | 80 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Example prints from the Easy PLA pillar
Sample prints.
Useful links |
