Description: Filament Fiberlogy Easy PLA 1,75 mm 0,85 kg - Graphite
Fiberlogy brand filament ingraphitecolour with a diameter of1.75 mm, wound on reels of0.85 kgnet weight. It was vacuum packed with the addition of a moisture absorber. Fiberlogy's filters are designed for all3D printers, working in FFF / FDM technology, unprotected against the use of cartridges from another company and for open source devices. Suggested printout parameters using the described filter are: head temperature between200°C and 230°C andtable temperature from 60°Cto 70°C.The manufacturer recommends cooling the printout. The Easy PLA filter can be used e.g. for printing various types of prototypes, toys, individual parts of toys, jewellery, decorations, etc.
In our offer of filaments you will also find other materials and colors.
Filament Fiberlogy Easy PLA 1,75 mm 0,85 kg - Graphite.
Properties of the Easy PLA file
Filament is produced, among other things, from renewable raw materials, thanks to which it is biodegradable.Moreover, PLA is distinguished by a very low material shrinkage and increased resistancetoUV rays. Due to its minimal water absorption, it is used, among others, for the production of food packaging, surgical threads and even implants. The described filament is characterized by a poorly perceptible smell. What is more, it is not flammable, which significantly increases work safety. PLA is a material fullywaterproofand characterized by high warpage resistance and durability. Due to its properties and ease of use,PLAis intended, among others, for beginner users of three-dimensional printers. It is characterized by a very good combination of layers during 3D prints. The table heating is not required.
Suggested print parameters for filament
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Graphite |
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Spool - material | Easy PLA |
| Reel diameter | 200 mm |
| Reel width | 80 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Example prints from the Easy PLA pillar
Sample prints.
Useful links |
