Description
Waterproof probe is equipped with a digital thermometer DS18B20+ having the 1-wire communication interface.
Pins are the insulated wires:
- power supply VCC - red
- ground GND - black or green
- data 1-wire - white or yellow
|
The product is compatible with Arduino and Raspberry Pi User guide for Arduino is available at this address. The sensor can also be controlled using the Raspberry Pi, when connected as described in this article. |
Specification
- Supply voltage: from 3.0 V to 5.5 V
- Measurement range: from -55 °C to 125 °C
- Accuracy: +/- 0,5 °C in the range from -10 °C to 85 °C
- Resolution: 9 to 12 bits
- Dimensions of probe:
- Diameter: 6 mm
- Length: 51 mm
- Cable length: 10 m (tolerance of + / - 30 cm)
Useful links |
