- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: TFT IPS display - with rounded corners - 1,47'' 320 x 172 px - for Raspberry Pi and Arduino - Adafruit 5393
TFT IPS color display with 1.47 '' diagonal and 320 x 172 px resolution. This module was produced by Adafruit company. Compared to other displays it is distinguished by rounded sides, so it can be used in untypical projects. It is equipped with the most popular TFT screen driver - ST7789, for which many free libraries are available. The display uses a 4-wire SPI interface and has its own pixel addressable frame buffer, so it can be used with a wide range of microcontrollers. It is powered by 3.3 V or 5 V.
TFT IPS display - with rounded corners - 1.47'' 320 x 172 px - for Raspberry Pi and Arduino - Adafruit 5393.
Special features of the display
- Equipped with ST7789 driver
- It has rounded sides
- Slot for microSD memory card formatted in FAT16 / FAT32 (card may be purchased separately)
- Comes with a 2.54mm goldpin strip
- Features an 18-pin "EYE SPI" FPC connector with a flip-top connector so that you can use a 0.5mm gauge 18-pin FPC strip to connect to all GPIO pins to skip soldering
- The display is designed for smartwatch projects. The manufacturer recommends the use of an additional mount between the screen and the board (e.g. an overlay, glue or tape), as the two components may disconnect during vigorous use.
The product is compatible with Arduino and Raspberry Pi!
Free libraries and sample program code for specific programming languages are available on the manufacturer's website: Arduino IDE and Python / CircuitPython
Pinout description of FPC EYE SPI
- VIN (power supply from 3 V to 5 V DC)
- Backlight (optional PWM logic input from 3 V to 5 V)
- GND
- SPI interface clock line (logic input from 3 V to 5 V)
- SPI MOSI SPI line
- SPI MISO SPI line
- TFT Data / Command selector
- TFT RESET pin
- TFT chip selection SPI
- Select SD card chip SPI
- Pin not used
- Pin not used
- Pin not used
- Pin not used
- Pin not used
- Pin not used
- Pin not used
- Pin not used
The board has 18-pin FPC "EYE SPI" connector.
There is a memory card connector on the back of the board.
Technical specification of the display
- Type: TFT LCD display
- Screen diagonal: 1,47''
- Resolution: 172 x 320 px
- Controller: ST7789
- Communication interface: 4-pin SPI
- Built-in microSD memory card slot
- Connectors: 1x11 male pins with 2.54 mm pitch for easy prototyping
- Shape: rectangle with rounded sides
- Number of mounting holes: 4
- Diameter of mounting holes: 2.5 mm
- Screen dimensions: 34 x 19.4 mm
- Total module dimensions: 37.3 x 30.5 x 5.1 mm
- Weight: 6.7 g
