Product description: Shelly Qubino Wave i4 DC - 4-channel Z-Wave scene controller - DC 5 V - 24 V
Shelly Qubino Wave i4 DC is a Z-Wave scene controller with four digital inputs , designed to create and synchronize automation scenes. It allows you to activate up to 12 actions using buttons or switches, working with certified Z-Wave gateways . The DC version is powered by a voltage of 5 V to 24 V DC . The controller operates in the Z-Wave 868.4 MHz band, providing wide connectivity to over 4,000 Z-Wave devices. Thanks to the SmartStart function, configuration is quick and easy. Wave i4 DC does not require a neutral wire and is characterized by very low power consumption - below 0.3 W. The possibility of OTA firmware updates and compatibility with systems such as Google Home, Alexa, SmartThings make it an ideal solution for smart homes. The controller, due to its small dimensions , can be easily placed behind any wall switch.
The manufacturer has prepared a detailed user guide that will facilitate the installation and configuration of the controller - check it out!
Shelly Qubino Wave i4 DC - 4-channel Z-Wave scene controller - DC 5 V - 24 V.
The Wave i4 DC can control the operation of four inputs.
Key Features of Shelly Qubino Wave i4 DC
- No relays : Wave i4 DC acts as a digital input reader, not a relay
- 4 digital inputs : allow you to control Z-Wave devices using buttons or switches
- Multi-click : supports up to 12 different click actions
- Very low power consumption (< 0.3 W) : energy saving thanks to modern technology
- Z-Wave 800 Series : provides high performance and reliability
- Z-Wave 868.4 MHz band : CEPT compliant
- SmartStart : automatic setup for easy installation
- Z-Wave S2 Authenticated : high level of security
- OTA Updates : Allows easy software updates
- Compatibility : works with over 4,000 Z-Wave devices
To configure the device, a gateway (smart hub) is required , which is not included in the kit.
Z-Wave technology
Z-Wave is an advanced wireless communication protocol , optimized for Smart Home devices. It operates on a low band, which reduces interference and ensures stable connections . It enables two-way data exchange and expansion of the mesh network without losing signal. Thanks to the Security 2 encryption used, it ensures a high level of security.
In Shelly Qubino Wave i4 DC, Z-Wave 800 Series technology offers:
- Low energy consumption
- Automatic pairing with SmartStart
- Support for Security 2 Authenticated
- Compatibility with over 4,000 Z-Wave devices
Designed to control other Z-Wave devices.
It operates on a sub-GHz frequency, which ensures a stable and reliable wireless connection.
Connection and Compatibility
Shelly Qubino Wave i4 DC is easy to install, thanks to its compact dimensions that allow it to be mounted behind standard wall switches. Powered by a voltage from 5 V to 24 V DC , it works with home automation systems such as Google Home, Alexa, and SmartThings. To configure the controller, you must use a certified Z-Wave gateway, and the SmartStart function allows automatic pairing with devices. This makes installation quick and intuitive. Additionally, OTA updates ensure that the Wave i4 DC always stays up to date with the latest software , ensuring its long-term reliability and security.
Shelly Qubino Wave i4 Technical Specification
- Model: QNSN-0D24XEU
- DC Power Supply: 5V to 24V
- Power consumption: <0.3 W
- Number of inputs: 4
- Processor: Z-Wave S800
- Z-Wave band: 868.4 MHz
- Maximum radio frequency power: < 25 mW
- Overload protection: no
- Power measurement: no
- Operation without neutral wire: no
- Range: up to 40 m indoors, depending on local conditions
- Installation: wall bracket
- Maximum torque for screw terminals: 0.4 Nm
- Wire cross-section: 0.5 mm² to 1.5 mm²
- Cut wire length: 5 mm to 6 mm
- Housing material: plastic
- Ambient temperature: -20°C to 40°C
- Dimensions: 37 x 42 x 16 mm
- Weight: 17 g
The Wave i4 DC can be powered by a DC voltage of 5 V to 24 V.
Useful links |
