Product description: Temperature controller - TEC-20A-25V-PID-H
Advanced TEC temperature controller using a microcontroller. The module is mounted on a small heat sink that dissipates heat from the system. It is powered from 7V to 25 V.The maximum current for TEC is 20 A. It is equipped with a 10 kΩ NTC B3950 sensor. The temperature task range is from 10°Cto 40°C.Temperature measurement accuracy is ± 0.2°C.
Contents of the temperature controller kit.
Thanks to the two-layer board,20 A TECcells can be used. The connectors allow a maximum flow of 13 A, so if larger Peltier cells are required, the cables must be soldered directly into the board. When installing the heat sink, make sure to separate it from theMOSFETtransistor, asa short circuit may damage the board.
The distribution of elements on the board.
Temperature controller specification
- Supply voltage: 7 V to 25 V
- Maximum current TEC: 20 A
- Accuracy of temperature measurement: ± 0.2°C
- Temperature sensor type: 10 kΩ NTC B3950
- Temperature setting range: 10°C to 40°C
- Dimensions: 50 x 38 mm
Useful links |
