Gravity series for Arduino - Strona 2
DFRobot Gravity - sound sensor - analog
Sound sensor module with analog output. Works with a supply voltage from 3.3 V to 5 V. It enables the determination of the volume or identifying characteristic sounds from the...DFRobot Gravity - analog sensor of ambient light
Analog ambient light sensor PT550 compatible with Arduino and Raspberry Pi. The sensor allows to determine the light density and reflects the analog voltage signal back to...DFRobot Gravity - digital sound generator - buzzer
Digital buzzer module for Arduino and Raspberry Pi, which can be controlled via low and high status. When changing the frequencies of the buzzer, you can hear a different...Gravity - segment display 4-digital I2C - green - DFRobot DFR0645-G
Four-digit, 8-segment Gravity series display with adjustable 8-level brightness levels, The modules are equipped with an I2C port compatible with the Gravity...Gravity: Analog High Temperature Sensor
Analog sensor of the high temperature, operating in the range from 30 °C to 350 °C. It is powered with a voltage of 3.3 V to 5.5 V. The kit has a PT100 probe.DFRobot Gravity - digital button Tact Switch - yellow
Digital monostable switch with 3-pin connector . It is powered from 3.3V to 5V and works with Arduino modules.DFRobot Gravity: Analog Heart Rate Monitor Sensor (ECG) For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog signal. The kit includes a probe,...DFRobot Gravity - RTC SD2405 I2C - real time clock module
Module with real time clock SD2405 has a dual power supply system, when there is a lack of the main power supply, the module automatically switches to battery power.DFRobot Gravity - line tracking sensor - reflective, digital
Digital sensor of tracking the line, reflective for Arduino, it can detect the white and black lines. Separate signals provides a stable output signal TTL, so it looks for more...DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...Gravity - analog AC current sensor - up to 5A - DFRobot SEN0287
Analog AC current sensor from DFRobot with a 1 m long probe . It allows you to measure the current flowing in the wire without having to cut it - the measurement is made...- New
DFRobot Gravity - Non-contact IR Thermometer Sensor MLX90614
Non-contact temperature sensor. It is used for measurement of IR radiation and does not require the direct touch. It communicates through an I2C interface.DFRobot Gravity - colorful RGB LED module
LED module lights up in the seven colors of the rainbow. The controller randomly chooses the color. Modules may be connected in a cascade, one interface can control all the...DFRobot Gravity - analogue meter of the sound level
The sound level meter is compatible with Arduino. For measurements, it uses the circuit instrument and the microphone with a low noise level that allows to accurately measure...DFRobot Gravity - digital IR transmitter
Digital IR transmitter from the Gravity, operating at a frequency of 38 kHz with a voltage of 5 V. The module communicates with an IR transmitter, after pairing the modules.- Reduced price
- Promotion
DFRobot Gravity - MP3 player - JQ8400-FL UART
Module that allows you to play music files directly from the 8 MB device memory . It supports MP3 and WAV formats. It communicates with the microcontroller via the UART...DFRobot Gravity converter prądowo current-voltage 0-25/0,3V
Module from the Gravity series enables the processing of the current signal from 0 mA to 25 mA into a voltage signal from 0 V to 3V. The sensor may be connected to the...Gravity - LIS2DW12 - 3-axis accelerometer ±2g/±4g/±8g/±16g - I2C - DFRobot SEN0409
Gravity module in a form of 3-axis accelerometer , which allows to measure linear acceleration. It has a built-in LIS2DW12 chip (belonging to the popular LIS series) and...DFRobot Gravity - vibration sensor with piezoelectric membrane
Analog vibration sensor with piezoelectric membrane. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.DFRobot Gravity SEN0224 - LIS2DH - 3-axis I2C accelerometer
Sensor for measuring acceleration in three axes in the range +/- 2 g , +-4 g, +g -8 or +-16 g . The module is powered with the voltage from 3.3 to 5 V, it has a voltage...DFRobot Gravity - digital magnetic field sensor
Digital magnetic sensor can detect the magnetic object near it. The supply voltage is from 3.3 V to 5 V.DFRobot Gravity - digital button Tact Switch - green
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.