Cytron SmartDriveDuo MDDS10 - two-channel 35V / 10A motor controller
Index: CTN-12406
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
ROBOTS AND MECHANICS - Strona 2
Loading...
NEMA 51- L-type Step Motor Mount - 130x130mm
The mounting is for stepper motor sizes according to NEMA 51 standard. The mounting has mounting holes for most 130 x 130 mm motors. To mount the motor you will need mounting...
Index: GRL-16973
Index: GRL-16973
- On sale!
- Promotion
Micro motor N20-BT42 75:1 170RPM - 6V
The N20 series miniature motor with 75:1 gearing, has 170 RPM, torque is 0.6 kg*cm (0.059 Nm). The supply voltage is 6 volts.
Index: DNG-12604
Index: DNG-12604
Extended Hexagonal Wheel Adapter - 12mm/6mm - 2pcs. - Pololu 2687
Aluminum adapter converting the 12 mm, hexagonal shaft suitable for different wheels, for 6 mm motor's shaft. The length of the adapter is equal to 35 mm.
Index: PLL-06093
Index: PLL-06093
Motor with 1:48 Gear 6V 280RPM - block Lego - 2pcs.
A set of two engines with the possibility of combining with Lego blocks. Motors with 1:48 gearbox. A single shaft turns at a speed of up to approx. 280 rpm on a 6-volt supply,...
Index: DNG-13668
Index: DNG-13668
Chassis Round 2WD - Robot Chassis with DC Motor Drive - gray-aluminum
Universal platform, made of metal, it allows you to build any driving robot, such as tracking line (line follower) or fighting robot (sumo). Y ou can control the platform...
Index: DNG-13744
Index: DNG-13744
- Reduced price
- Promotion
Aluminum gear with 10 teeth. Diameter: 18 mm, height: 23 mm, hole diameter: 8 mm.
Index: GRL-13766
Index: GRL-13766
- Reduced price
- Promotion
Servo Feetech FS5113M - standard 0 -180 degrees
Analogue standard servo. It works from 0 to 180 °. It is powered from 4.8 to 6 V . The product has a metal gearbox.
Index: FTC-16467
Index: FTC-16467
Aluminum gear with 24 teeth. Diameter: 45 mm, height: 25 mm, hole diameter: 10 mm.
Index: GRL-13769
Index: GRL-13769
Aluminum gear with 24 teeth. Diameter: 42 mm, height: 25 mm, hole diameter: 6 mm.
Index: GRL-13771
Index: GRL-13771
- Reduced price
- Promotion
Linear Actuator LA10 500N 13mm/s 12V - 10cm stroke
Electric linear actuator with 500 N (50 kg) lifting capacity . Powered by 12 V. The actuator's extension is 10 cm. It operates at 13 mm/sec. The device has a protection...
Index: WLS-15397
Index: WLS-15397
Linear Actuator LD1 6,4N 150mm/s 12V - 10cm stroke
Electric actuator with 6.4 N (0.64 kg) lifting capacity, operating at 150 mm/sec. The unit is powered by 12 V. It has a protection class IP54. Thanks to the use of metal...
Index: ELB-15479
Index: ELB-15479
Linear Actuator LA21 4000N 5mm/s 24 V - stroke 20cm
Linear actuator powered by 24 V. The maximum extension of the device is 20 cm and is limited by limit switches. The permissible load of the actuator is 400 kg (4000 N) ....
Index: WLS-17113
Index: WLS-17113
Linear Actuator LA50 1500N 100mm/s 12V - stroke 30cm
Rope actuator powered by 12 V . The maximum extension is 30 cm and is limited by two limit switches. The LA50 has a protection class of IP65. It can therefore be used in areas...
Index: WLS-17103
Index: WLS-17103
Servo Hitec HS-322HD - standard
Effective servo made by company Hitec, has karbonite gears with increased strength. Speed: 0.15 s/60°. Torque: 3.7 kg*cm. Dimensions: 41 x 20 x 37 mm. Weight: 43 gr.
Index: MOT-00820
Index: MOT-00820
The mounting plate is designed for linear systems whose rollers are to be distributed over a width of 20 mm. The plate has the ability to quickly insert the rollers and...
Index: VST-17342
Index: VST-17342
Micro motor N20-BT02 5:1 4000RPM - 12V
N20 series miniature motor with 5:1 gearing , has 4000 RPM , torque is 0.1 kg*cm (0.0098 Nm). The supply voltage is from 3V to 12V .
Index: DNG-12542
Index: DNG-12542
Toothed Belt 10x198mm + Gear 12T - 5mm - 2pcs.
The kit of the belt and the compatible gears. The circuit of the belt is around 198 mm, and its width is 10 mm. The wheel has 12 teeth. The width of the tooth surface is 11.2...
Index: GRL-12516
Index: GRL-12516
Micro motor N20-BT13 10:1 2200RPM - 9V
The N20 series miniature motor with 10:1 gearing, has 2200 RPM , torque is 0.2 kg*cm (0.02 Nm) . The supply voltage is from 3V to 9V.
Index: DNG-12552
Index: DNG-12552
Micro motor N20-BT20 30:1 730RPM - 9V
The N20 series miniature motor with 30:1 gearing, has 730 RPM, torque is 0.6 kg*cm (0.059 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12562
Index: DNG-12562
Aluminium Servo Mount Feetech FK-MB-001 - silver
Aluminum bracket for servos with the size of 58 x 37 x 25 mm and weight of 15 g.
Index: FTC-10899
Index: FTC-10899
Servo Feetech Wing FT3325P - micro
Servo type micro. The power voltage from 4.8 V to 6 V. Speed: 0.13 sec/60°. Torque: 7,21 kg*cm Dimensions: 30,0 x 10,0 x 35.5 mm Weight: 22 g
Index: FTC-10311
Index: FTC-10311
HPCB motor with 15:1 gear - 12V - Pololu 4788
A miniature engine from Polol from the powerful HPCB series. The motor is equipped with carbon brushes, which are more durable. The speed is 2200 rpm and the torque is...
Index: PLL-15981
Index: PLL-15981
- Reduced price
- Promotion
Profile V-Slot 2060 anodized black 250mm
Aluminium constructional profile 2060 with a length of 250 mm in black. Ideal for creating your own designs, the best examples are 3D printers, CNC milling machines or...
Index: VST-17324
Index: VST-17324
Profile V-Slot 2060 anodized silver 250mm
Aluminium constructional profile 2060 with a length of 250 mm in silver. Ideal for creating your own designs, the best examples are 3D printers, CNC milling machines or...
Index: VST-17326
Index: VST-17326