- Reduced price
Product description: Device Prototype Micromis Power Shield - power supply module - cover for Micromis Base V1
Micromis Power Shield is an innovative overlay designed to expand the capabilities of the Micromis Base V1 platform. This extremely functional overlay offers exceptional flexibility in powering both the platform and connected devices, enabling the use of alternating and direct current for voltages from 7 V to 35 V. It has an easily accessible 5.5 mm / 2.5 mm DC power connector and LEDs indicating active channels. The shield uses optocouplers to isolate the control, minimizing the risk of interference and protecting the user and components from potential surges . There are two relays on the board that users can use to control devices powered by up to 240 V AC or 100 V DC.
The overlay is intended for the Micromis Base V1 development board, which is available in our offer!
Device Prototype Micromis Power Shield - power module - overlay for Micromis Base V1.
The board allows you to connect an AC power supply or battery.
Main features of the overlay
- It allows you to power the Micromis Base V1 platform using a power supply or battery
- It allows you to control devices powered by voltage higher than 20 V using two built-in relays
- Control of two voltage outputs to power peripherals such as LED strips, motors or water pumps
- Provides safe control thanks to signal isolation using built-in optocouplers, protecting the system against interference
- It enables simple status signaling using LED diodes informing about the activation of individual channels
- It has a universal 5.5 mm / 2.5 mm DC power connector
Overlay for Micromis Base V1
The Micromis Power Shield overlay is a component that extends the capabilities of the Micromis Base V1 platform. It is an irreplaceable tool that allows you to connect additional external devices , such as sensors, home automation accessories or communication modules, directly to the control panel. It not only enables functional expansion of the system, but also offers signal isolation and protection against electrical interference, which is particularly important in complex installations.
The shield is designed to be connected to the Micromis Base V1 development board.
The device can control two relays and two voltage outputs.
Power function
A wide input voltage range from 7 V to 35 V allows you to operate a variety of power sources. The shield easily handles high voltage and current and allows control via relays supporting up to 240 V AC or 100 V DC . Additional voltage outputs allow you to power less demanding components up to 35 V at 1 A, which makes the overlay extremely flexible and practical in creating comprehensive smart home or automation systems.
Check available projects on the manufacturer's website that use the Micromis Base V1 component.
Technical specifications of the overlay
- Manufacturer: Device Prototype
- Model: Micromis Power Shield
- Compatibility: designed for Micromis Base V1
- Plate type: overlay
- DC supply voltage range: 7V to 35V
- Power connector type: DC 5.5mm / 2.1mm
- Power connector polarity: VCC inside, GND outside
- Maximum relay voltage: 240 V AC / 100 V DC
- Maximum parameters of power outputs: 35 V / 1 A
- Status indication: LED for each channel
- Number of relay channels: 2
- Number of voltage outputs: 2
- Protections: galvanic isolation via optocouplers
- Dimensions: 75 x 46 x 18 mm
The board has built-in optocouplers for circuit protection.
Useful links |
