Promotion products

Odroid power supply

Due to the rapid progress in semiconductor technology, more and more devices available on the market, works on the basis of electronics as APPLIANCES, ELECTRONICS, automobiles, machines for road works, musical instruments, automation budynkowa and many other varied categories. This situation leads to an increase in the requirements parameters of the sources of supply – also in case of devices for embedded systems such as the Odroid. We have prepared a range of power supplies and power leads, intended for the Odroid platform. We invite you to familiarize with our offer!

Products: 9
Loading...

Power supply cable 2.5x0.8mm for Odroid - angular

Cable with free wires with removed insulation, completed with a plug connector DC Jack 2.5 x 0.8 mm for  Odroid  minicomputer series.
Index: ODR-07608
Index: ODR-07608
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.74 Price €1.74

DC power cord 2,5x0,8mm for Odroid

Cable with free wires with removed insulation, completed with a plug connector DC Jack 2.5 x 0.8 mm for  Odroid minicomputer series.
Index: ODR-06536
Index: ODR-06536
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.08 Price €2.08

Power supply 5V / 2A DC 2.5x0.8mm for Odroid C0 / C1 + / C2

Power adapter with DC Jack connector for minicomputers from Odroid series C0 / C1+ / C2. Maximum current delivery is 2.0 A.
Index: ODR-06327
Index: ODR-06327
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.79 Price €7.79

DC power cord 2.5x0.7mm with bend protector for Odroid

Cable with free wires with removed insulation, completed with a plug connector DC Jack 2.5 x 0.7 mm for  Odroid  minicomputer series. Cable length is approx. 90 cm
Index: KAB-07037
Index: KAB-07037
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.07 Price €2.07

Power cable USB - 2.5x0.8mm DC for Odroid

USB cable completed with a plug connector DC Jack 2.5 x 0.8 mm for a minicomputer from the Odroid series.
Index: ODR-06535
Index: ODR-06535
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.00 Price €3.00

Power supply 15V/4A - plug 5,5/2,1mm for Odroid H2

Switch-over power supply with 5.5 / 2.1 mm plug with 15 V supply voltage and 4 A current capacity, recommended to power a Odroid H2 minicomputer. It has a detachable European...
Index: ODR-14755
Index: ODR-14755
Shipping in 24 hours
Available, 24h shipping!
(Check quantity)
Regular price €14.53 Price €14.53

Power supply 5V / 4A DC 5.5x2.1mm for Odroid XU4

Power adapter with connector DC 5,5/2,1 mm for minicomputers from Odroid XU4 series. The maximum capacity is 4.0 A.
Index: ODR-06328
Index: ODR-06328
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €8.35 Price €8.35

SATA data and power cable for Odroid H2

A set containing SATA cables for the complete connection of an HDD / SDD to a Odroid H2 chassis with the possibility of installing the drive. Includes SATA power cord and SATA...
Index: ODR-15152
Index: ODR-15152
Waiting for delivery
Waiting time about 10-30 days
Regular price €4.63 Price €4.63

Power supply Extreme 2x USB 5V / 2.1A

Power supply with two USB type A outputs. Output coltage og 5 V, maximum output current of 2.1 A.
Index: ZAS-01462
Index: ZAS-01462
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.33 Price €5.33

What are the main aspects relating to power supplies for electronic devices?

The basic parameters that you should pay attention to when choosing the optimal power supply device, it is primarily nominal voltage of network nominal output voltage, maximum current output connector type output and – depending on its type, the polarity of the output voltage. Adjusting the output voltage of the power supply should have high efficiency and resistance to interference in the case of fast switching loads. Most of our models minikomputera Odroid requires power using a power supply with an output voltage of 5 VDC and maximum load current of 4 A. A for minikomputera Odroid H2 provided by the power supply at the same speed of loading, but with output voltage of 15 V. we Offer power supply modules compatible with Odroid and have a connector circular cross-section and an internal diameter of 2.1 mm and an outside diameter of 5.5 mm, suitable to the power connector on the Odroid boards.

Smart power cost SmartPower2 for the system Odroid

One of the main features for developing embedded systems is the analysis of parameters, informing about their demand for electricity. Among the many types of quality tests is important to check the efficiency of software integrated in the OS depending on the parameters of the power source. We offer tile Odroid SmartPower2 is the ideal tool to perform such tasks. In a large simplification is an intelligent power module that can periodically record and store in memory parameters such as supply voltage, supply current and load mocowe power system for purposes of analysis and optimization of energy consumption, food minikomputer. The user can read the measurement results on integrated LCD display type 1602.